R K Engineering Works, VKI Area, Jaipur, is a dock leveler manufacturer in Rajasthan that designs, builds, installs and services hydraulic, mechanical and edge-of-dock levelers for warehouses and factories. A dock leveler bridges the height gap between your loading dock and the truck bed, so forklifts and pallet trucks can roll in and out safely.
This guide explains the dock leveler types, the sizes and capacities buyers usually pick, a simple six-step way to choose one, and the districts we serve. It is written for warehouse managers, plant engineers and purchase teams who are planning a new loading bay or fixing an old one.
Who is a dock leveler manufacturer in Rajasthan?
R K Engineering Works has made material handling equipment in Jaipur since 1998. Our works is at 29 Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013. We are certified to ISO 9001, ISO 14001 and ISO 45001.
Besides dock levelers, we build goods lifts, scissor lifts, EOT and gantry cranes, hoists and winches. This matters for a loading bay, because one team can plan the leveler, the goods lift to the upper floor and the crane or hoist inside the shed together. We design each leveler for your dock height, truck mix and forklift weight, then fabricate, paint and test it at our Jaipur works before it goes to site.
Which dock leveler type fits your loading bay?
There are four common types. The right one depends on how many trucks you load each day, how wide the height gap is, and whether you can cut a pit in the dock.
| Type | How it works | Best for | Point to note |
|---|---|---|---|
| Hydraulic dock leveler | A hydraulic cylinder raises the deck and extends the hinged or telescopic lip at the push of a button | Busy warehouses, cold stores, FMCG and e-commerce hubs | Needs a pit and a power supply; smooth and easy for operators |
| Mechanical dock leveler | Springs lift the deck when a chain or handle is pulled; the operator walks it down | Medium traffic docks with fewer loads a day | No power pack; more effort for the operator |
| Edge-of-dock leveler | A short plate fixed to the dock face flips over onto the truck bed | Small height gaps and light pallet trucks | No pit needed; limited working range |
| Mobile yard ramp | A wheeled steel ramp that runs from ground level up to the truck bed | Sites without a raised dock | Takes yard space; used where no loading dock exists |
For a deeper look at each type, read our guide on dock leveler types and how to choose.
What size and capacity should you specify?
Three numbers decide the leveler: the capacity, the platform size and the working range above and below the dock.
- Capacity: most warehouses choose 6 or 8 tonnes. Plants with heavy forklifts or dense loads choose 10 tonnes. The figure must cover the forklift, its load and the impact as it crosses.
- Platform length: common lengths are 2,000 mm, 2,500 mm and 3,000 mm. A longer deck gives a gentler slope for the same height gap.
- Platform width: 2,000 mm suits most trucks and containers in India.
- Lip: the hinged or telescopic lip rests on the truck bed, usually 400 to 500 mm long.
Here is a quick slope check. Slope equals the height gap divided by the platform length. A 250 mm gap on a 2,500 mm deck gives a 10% slope. Battery pallet trucks work best on gentle slopes, so if your truck beds vary a lot, choose a longer platform.
How do you choose a dock leveler? Six steps
- Measure your dock height from the yard floor, and note the shortest and tallest truck beds you load.
- List the heaviest forklift or pallet truck that will cross, with its load.
- Count how many trucks you load or unload in a day. Busy docks suit hydraulic levelers.
- Check if a pit can be cut at the dock edge. If not, look at edge-of-dock levelers or a yard ramp.
- Ask for safety items: toe guards on the sides, a maintenance strut, a velocity fuse or safety valve on hydraulic models, and bumpers to protect the dock wall.
- Book a site survey so our engineer can measure the dock and mark the pit.
If goods must also go to an upper floor, plan the dock together with a hydraulic goods lift. For a single level change inside the shed, a scissor lift may be the simpler choice. Pit and headroom planning for lifts is covered in our goods lift pit and headroom guide.
Which districts in Rajasthan do we serve?
We supply and install dock levelers from our Jaipur works to warehouses, logistics parks and factories across Rajasthan, including:
- Jaipur region: VKI Area, Sitapura, Bagru, Kaladera and Mahindra World City.
- North-east industrial belt: Bhiwadi, Neemrana, Alwar and Kotputli.
- Central and west: Ajmer, Kishangarh, Beawar, Jodhpur and Pali.
- South and Hadoti: Udaipur, Bhilwara, Chittorgarh, Kota and Bundi.
- North: Bikaner, Hanumangarh and Sri Ganganagar agro warehouses and cold stores.
After handover we give AMC visits for hydraulic oil and seals, hinges, the lip and safety legs, along with breakdown repair and spares.
FAQs
Do you make dock levelers in Rajasthan?
Yes. R K Engineering Works designs and builds hydraulic and mechanical dock levelers at VKI Area, Jaipur, and installs them at warehouses and factories across Rajasthan.
What capacity dock leveler do I need?
Take the heaviest loaded forklift or pallet truck, with its load, that will cross the leveler. Most warehouses choose 6 or 8 tonnes; busy plants with heavy forklifts choose 10 tonnes.
Can a dock leveler be fitted to an existing loading bay?
Yes. A pit-type leveler needs a pit cut into the dock edge. Where cutting a pit is not possible, an edge-of-dock leveler or a mobile yard ramp is used.
Do you service dock levelers after installation?
Yes. We give AMC visits for hydraulic oil, seals, hinges, lip and safety legs, plus breakdown repair and spares.
राजस्थान में डॉक लेवलर कौन बनाता है?
आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, 1998 से हाइड्रोलिक और मैकेनिकल डॉक लेवलर बनाता और पूरे राजस्थान के गोदामों और फैक्ट्रियों में लगाता है।
डॉक लेवलर के लिए कितनी क्षमता चुनें?
लोड सहित सबसे भारी फोर्कलिफ्ट या पैलेट ट्रक का वज़न देखें। ज़्यादातर गोदाम 6 या 8 टन चुनते हैं, भारी फोर्कलिफ्ट वाले प्लांट 10 टन चुनते हैं।
Request an engineering consultation
Planning a new loading bay or replacing an old leveler? Request an engineering consultation or book a site survey: call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. R K Engineering Works, 29 Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013.
Last updated: 14 November 2026