Semi Gantry Crane in Kota | सेमी गैन्ट्री क्रेन कोटा

Last updated: 19 November 2026

Who makes semi gantry cranes in Kota?

R K Engineering Works, VKI Area, Jaipur, designs, builds and installs semi gantry cranes for factories in Kota, Bundi, Baran and Jhalawar. A semi gantry crane runs on a building rail on one side and on a leg with a floor rail on the other side. We design to IS 807 and IS 3177 and load-test every crane at 125% of rated load. Since 1998, ISO 9001, 14001 and 45001.

कोटा में सेमी गैन्ट्री क्रेन कौन बनाता है?

आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, कोटा, बूंदी, बारां और झालावाड़ के कारखानों के लिए सेमी गैन्ट्री क्रेन बनाती और लगाती है। सेमी गैन्ट्री क्रेन की एक तरफ शेड के कॉलम पर रेल होती है और दूसरी तरफ एक पैर (लेग) जमीन की रेल पर चलता है। हम IS 807 और IS 3177 के अनुसार डिजाइन करते हैं और हर क्रेन की 125% लोड टेस्टिंग करते हैं।

What is a semi gantry crane?

A semi gantry crane is a mix of an EOT crane and a gantry crane. One end of the girder rides on a rail fixed to the building columns or wall. The other end stands on a leg that runs on a rail set in the floor. It is useful where a shed has only one strong side, or where the crane must work along an outside wall.

Kota plants often use it in stone and cement units, chemical and fertiliser works, engineering workshops and stores along the Ranpur and RIICO industrial areas. For a full comparison of crane types, read our guide on gantry vs semi gantry vs goliath crane.

Common jobs for a semi gantry crane in Kota: loading stone slabs along an outside wall, handling moulds and dies beside a machine shop, moving bags and drums in a store with one open side, and lifting pumps and motors in a plant maintenance bay. In each case the crane covers the full bay length without a second runway.

Semi gantry crane: main specification points

ItemWhat you decideTypical choice
CapacityHeaviest load including lifting tackleSingle girder for light loads, double girder for heavier loads
SpanDistance from building rail to floor railFixed by bay width and leg position
Lift heightHook to floor at top positionSets leg height and hoist drum
Duty classLifts per hour and load spectrumM3 to M5 for most workshops (IS 3177)
HoistWire rope or chain hoistElectric wire rope hoist for regular duty
Floor railRail and RCC beam on the leg sideRail clamped on a designed RCC beam
ControlPendant, radio remote or cabinPendant or radio remote
TestingProof load before handover125% of rated load with report

How to choose a semi gantry crane in Kota: 5 steps

  1. Write the heaviest load, span and lift height you need.
  2. Check the building column or wall can take the crane wheel loads; we check this at the site survey.
  3. Decide the duty class from lifts per hour and hours per shift (see our duty class guide).
  4. Plan the floor rail beam and keep the leg path clear of drains and trenches.
  5. Fix the power feed (DSL or festoon), control type and limit switches.

Semi gantry vs full gantry vs EOT crane

PointSemi gantry craneFull gantry craneEOT crane
SupportOne side building, one side legTwo legs on floor railsBoth sides on building runway
Best forShed with one strong sideOpen yardClosed shed with full runway
Civil workOne gantry rail plus one floor railTwo floor railsTwo gantry rails on columns
Floor spaceOne leg path kept clearTwo leg paths kept clearFloor fully clear

For a closed shed with columns on both sides, an EOT crane is usually the right choice. See our page on EOT crane manufacturer in Kota.

Safety items on every semi gantry crane

  • Hoist upper and lower limit switches
  • Long travel end limits and end stoppers on both rails
  • Electromagnetic fail-safe brakes on hoist and travel
  • Overload protection on the hoist
  • Emergency stop on the pendant or remote
  • Anti-collision and warning hooter where two cranes share a bay
  • Rail clamps or storm anchor for outdoor sections

Every crane is load-tested at 125% of rated load before handover. Read what a 125% crane load test checks.

Service area and support

We supply and install semi gantry cranes in Kota city, Ranpur, Bundi, Baran, Jhalawar, Ramganj Mandi and the rest of Rajasthan from our works in Jaipur. For planned upkeep, see our crane AMC for Kota, Bundi, Baran and Jhalawar. For small work stations, a jib crane for Kota may suit better.

FAQs

Who makes semi gantry cranes in Kota?

R K Engineering Works, VKI Area, Jaipur, designs, builds and installs semi gantry cranes for plants in Kota, Bundi, Baran and Jhalawar. Each crane is load-tested at 125% of rated load before handover.

When should I choose a semi gantry crane instead of an EOT crane?

Choose a semi gantry crane when one side of the bay has a strong wall or column line for a rail, and the other side has no building support. It saves building one full runway.

Does a semi gantry crane need a rail on the floor?

Yes. The leg side runs on a floor rail fixed on an RCC beam. The other side runs on a gantry rail on the building columns or wall.

Which standards apply to a semi gantry crane?

We design the structure and mechanism to IS 807 and IS 3177 duty classes, and test at 125% of rated load.

कोटा में सेमी गैन्ट्री क्रेन कौन बनाता है?

आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, कोटा, बूंदी, बारां और झालावाड़ के कारखानों के लिए सेमी गैन्ट्री क्रेन बनाती और लगाती है। हर क्रेन की 125% लोड टेस्टिंग होती है।

सेमी गैन्ट्री क्रेन कब लें?

जब शेड की एक तरफ मजबूत कॉलम या दीवार हो और दूसरी तरफ खुली जगह हो, तब सेमी गैन्ट्री क्रेन सही रहती है।

Request an engineering consultation or book a site survey: +91 9799108009, +91 9413341806, contact@rkengineeringworks.in. R K Engineering Works, 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013.

Leave a Comment

Your email address will not be published. Required fields are marked *