Plants in Jhunjhunu district can get EOT cranes from R K Engineering Works, an EOT crane manufacturer in VKI Area, Jaipur, about 180 km by road from Jhunjhunu town. We design single and double girder EOT cranes to IS 3177 and IS 807, install them at your shed in Jhunjhunu, Chirawa, Khetri, Pilani or Nawalgarh, and load-test each crane at 125% of its rated load before handover.
This guide is set out town by town. It shows the crane types that usually suit each part of the Shekhawati belt, a spec checklist with the Indian Standards behind each point, and a decision matrix to help you pick the right crane before you ask for a quote.
- Works: 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013
- Building cranes since 1998; ISO 9001, ISO 14001 and ISO 45001 certified
- Design codes: IS 3177 (cranes), IS 807 (structure), IS 3938 (wire rope hoists)
- Every crane load-tested at 125% of safe working load at site
- Area covered: all of Jhunjhunu district, plus Sikar, Churu and the rest of Rajasthan
Which Jhunjhunu towns and industries do we serve?
Each town in the district has its own mix of work. The table below shows typical lifting jobs and the crane we usually suggest first. Your final choice depends on the load, span and hours of use.
| Town / area | Typical lifting work | Crane we usually suggest |
|---|---|---|
| Jhunjhunu town and RIICO industrial area | Fabrication, steel structures, agro-processing stores, workshops | Single girder EOT crane, 2 to 10 ton |
| Chirawa | Workshops, food and dairy units, warehouses | Single girder or underslung crane; goods lift where floors are stacked |
| Khetri and Khetri Nagar | Mining machinery repair, heavy maintenance bays | Double girder EOT crane, class M5 or M6 |
| Pilani | Institute workshops, labs, small production units | Light single girder crane or jib crane |
| Nawalgarh | Stone, construction material, small fabrication | Single girder EOT crane; gantry crane for open yards |
| Surajgarh, Udaipurwati, Buhana, Mandawa | Workshops, stores and service centres | Single girder EOT crane or electric hoist on a monorail |
What should the spec sheet of a Jhunjhunu EOT crane include?
Use this numbered checklist when you compare quotes. Each point is tied to a standard, so two quotes can be compared line by line.
- Safe working load and lift height, written in ton and metres. This sets the hoist, rope and girder size.
- Class of crane (duty) as per IS 3177, from M3 for light use to M6 and above for heavy daily use. See our duty class guide.
- Girder and end carriage design to IS 807, with deflection and wheel loads shown in the calculation.
- Electric wire rope hoist to IS 3938, with rope safety factor and drum details listed. Read more on our electric wire rope hoist page.
- Heat and dust protection for Shekhawati summers: IP55 motors, class F insulation and a ventilated control panel.
- Safety devices: overload limit switch, upper and lower hoist limits, travel limits, buffers and an emergency stop on the pendant or radio remote.
- Testing and papers: 125% static load test at site, test certificate, GA drawing, wiring diagram and operation manual.
Single girder, double girder, underslung or gantry: which fits your shed?
This decision matrix compares the four common options against what matters most in Jhunjhunu sheds.
| Point to check | Single girder EOT | Double girder EOT | Underslung crane | Gantry crane |
|---|---|---|---|---|
| Usual load range | Up to about 15 ton | 10 ton and above | Light loads, up to about 5 ton | Any, set by legs and rails |
| Headroom needed | Moderate | Least hook height lost, best use of shed height | Hangs from roof, needs roof strength | No shed needed |
| Needs crane columns or gantry girder | Yes | Yes | No, hangs from roof trusses | No, runs on ground rails |
| Best fit in the district | Fabrication and general workshops | Khetri heavy repair bays | Chirawa and Pilani light units | Nawalgarh open yards |
For heavy or busy bays, see our double girder EOT crane page. For a full view of our Jaipur works and range, visit EOT crane manufacturer in Jaipur.
How does a Jhunjhunu crane project run from enquiry to handover?
| Stage | What happens | What you receive |
|---|---|---|
| 1. Enquiry | You share load, span, lift and shed details | List of open points |
| 2. Site survey | Our engineer checks columns, rails, power and access | Survey notes and photos |
| 3. Design | Crane designed to IS 3177 and IS 807 | GA drawing and wheel loads for approval |
| 4. Build | Girders, end carriages, hoist and panel made in Jaipur | Stage inspection on request |
| 5. Delivery and erection | Crane moved by road to your site and erected | Erection checklist |
| 6. Testing | 125% static load test and function checks | Test certificate |
| 7. Handover | Operator briefing and safety points | Manual, wiring diagram, spares list |
What support do Shekhawati plants get after installation?
Cranes in hot, dusty sheds need regular checks. Our crane AMC covers planned inspection of brakes, wire rope, hooks, limit switches, gearboxes and panels, with breakdown support across Jhunjhunu, Sikar and Churu. Older cranes can be upgraded with new hoists, VFD panels and radio remotes.
FAQs
Do you install EOT cranes in Jhunjhunu district?
Yes. We build the crane at our works in VKI Area, Jaipur, then transport, erect and load-test it at your shed in Jhunjhunu, Chirawa, Khetri, Pilani, Nawalgarh or any other town in the district.
Which EOT crane suits a small fabrication shed in Jhunjhunu?
Most small sheds need a single girder EOT crane of 2 to 10 ton with an electric wire rope hoist, class M3 or M4. If the shed has low headroom or heavy daily use, a double girder crane may be the better fit.
What details do you need to quote a crane?
Send the safe working load, span between rails or columns, lift height, daily working hours, power supply and a photo or drawing of the shed. We then plan a site survey.
Who services the crane after installation?
We do. Plants can take our crane AMC for planned checks of brakes, wire rope, limit switches, gearboxes and the electrical panel, plus breakdown support and spares.
झुंझुनू में ईओटी क्रेन कौन बनाता है?
आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, 1998 से ईओटी क्रेन बना रहा है। हम झुंझुनू, चिड़ावा, खेतड़ी, पिलानी और नवलगढ़ के प्लांट के लिए IS 3177 के अनुसार क्रेन बनाते, लगाते और 125% लोड पर टेस्ट करते हैं।
खेतड़ी या चिड़ावा में क्रेन की सर्विस मिलेगी?
हाँ। इंस्टॉलेशन के बाद हम एएमसी, ब्रेकडाउन सपोर्ट और स्पेयर पार्ट्स देते हैं। साइट सर्वे के लिए संपर्क पेज से अनुरोध भेजें।
Share your load, span and shed details to request an engineering consultation, or call +91 9799108009 / +91 9413341806. Email: contact@rkengineeringworks.in. Price on request after site study.
Last updated: 13 November 2026
Related: EOT crane manufacturer for Pali and Hanumangarh | dock leveler supplier for Alwar and Bhiwadi