Looking for a goods lift manufacturer for Sri Ganganagar or Jhunjhunu? R K Engineering Works, VKI Area, Jaipur, has designed, built and installed hydraulic and industrial goods lifts since 1998, and serves plants, mills, cold stores and warehouses in both districts. Most units with two to four floors are best served by a hydraulic goods lift designed to IS 14665, sized for the heaviest load you move every day.
This guide explains, in simple words, which goods lift type fits your building, what to measure, which safety items matter, and how a project runs from survey to handover. Last updated: 14 November 2026
Who is a goods lift manufacturer for Sri Ganganagar and Jhunjhunu?
R K Engineering Works is a goods lift manufacturer based at 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013. We design each lift in-house, fabricate it at our Jaipur works under ISO 9001, ISO 14001 and ISO 45001 systems, and install it at your site with our own team. The same team builds EOT cranes, hoists and dock levelers, so heavy loads and safe lifting are part of our daily work.
Sri Ganganagar is an agro belt. Cotton ginning units, rice and flour mills, oil mills, fruit processing units and cold stores move sacks, bales and crates between floors. Jhunjhunu has grain warehouses, cold stores, fabrication workshops, showrooms and commercial buildings that need a safe way to move goods up and down. Both districts need a lift that handles dust, heat and long working hours.
Which goods lift types can you choose?
Most buyers pick from three types. The right choice depends on the number of floors, the load and how often the lift runs.
| Lift type | How it works | Best for | Point to note |
|---|---|---|---|
| Hydraulic goods lift | An oil cylinder pushes the platform up; it comes down under control | Mills, cold stores and warehouses with 2 to 4 floors | No machine room on top; needs a pit and a power pack room |
| Traction (rope) industrial goods lift | A motor and ropes move the car with a counterweight | Buildings with more floors and many trips per shift | Needs space for the machine at the top of the shaft |
| Hydraulic scissor lift | Folding steel arms raise a platform | One level change, such as a mezzanine or truck bed | Short travel only; no full shaft |
What specification should a goods lift in these districts have?
Use this spec sheet when you ask any supplier for a design. Every point is fixed after a site survey.
| Spec point | What to decide | Typical range we design |
|---|---|---|
| Capacity | Heaviest regular load plus trolley or pallet truck | Up to 5000 kg |
| Floors and travel | Number of stops and floor-to-floor height | Ground plus one to several floors |
| Platform size | Biggest bale, sack stack, crate or trolley plus working space | Designed to your load |
| Doors | Manual collapsible or swing doors with interlocks | One or two entrances |
| Safety | Door interlocks, overload cut-out, emergency stop, safety gear or rupture valve | Fitted on every lift |
| Standard | Design basis for the lift | IS 14665 where relevant |
| Site conditions | Dust, heat, indoor or outdoor shaft | Sealed power pack and dust-aware panel layout |
How do you choose the right goods lift? 6 steps
- Write down the heaviest load you move often and add the trolley or pallet truck weight.
- Count the floors and measure each floor-to-floor height.
- Measure the space for the shaft and check how deep a pit you can give.
- Note the size of your biggest bale, crate or trolley, and the door width you need.
- Check your power supply and where the control panel and power pack can sit.
- Book a site survey so the final drawing matches your building.
Hydraulic or traction goods lift: which is better for Sri Ganganagar and Jhunjhunu?
| Point | Hydraulic goods lift | Traction goods lift |
|---|---|---|
| Floors | Best for 2 to 4 floors | Better for more floors |
| Machine room | Small power pack room near the shaft | Machine space at the top of the shaft |
| Building load | Most load goes to the pit floor | Load goes to the top of the shaft structure |
| Ride | Smooth, level stops for trolleys | Faster for long travel |
| Typical use here | Mills, cold stores, warehouses, showrooms | Taller commercial or storage buildings |
For most mills and warehouses in Sri Ganganagar and Jhunjhunu, a hydraulic goods lift is the simplest choice. See our full goods lift range and the industrial goods lift guide for more detail.
Which safety features should a goods lift have?
- Door interlocks, so the lift cannot move with a door open.
- Overload cut-out that stops the lift if the load is too heavy.
- Emergency stop buttons in the car and at each landing.
- Rupture valve on hydraulic lifts, or safety gear on traction lifts.
- Upper and lower limit switches and clear load capacity boards.
Train your operators, never let people ride on a goods-only lift, and keep a written record of every service visit. A planned maintenance contract keeps the lift safe; our AMC team also covers lifts and cranes across Rajasthan.
How is a goods lift project planned and installed?
- Engineering discussion: you share the load, floors, heights and photos.
- Site survey: our engineer measures the shaft, pit and power supply.
- Drawing and civil details: you receive the layout and pit details for your civil team.
- Fabrication at our Jaipur works under ISO 9001 quality checks.
- Installation at your Sri Ganganagar or Jhunjhunu site by our own team.
- Testing of every safety item, operator training and handover.
Do you also supply cranes in these districts?
Yes. Many plants that need a goods lift also need an overhead crane or hoist. Read our EOT crane guide for Jhunjhunu. Our cranes are designed to IS 3177 and IS 807 and load-tested at 125% before handover.
FAQs
Do you install goods lifts in Sri Ganganagar and Jhunjhunu?
Yes. R K Engineering Works designs and builds goods lifts at VKI Area, Jaipur, and installs them in Sri Ganganagar, Jhunjhunu and the rest of Rajasthan with its own team.
Which goods lift suits a two-floor mill or cold store?
A hydraulic goods lift is usually the simplest choice for two or three floors. It needs no machine room on top and gives smooth, level stops for trolleys and pallet trucks.
How much load can your goods lifts carry?
Our industrial goods lifts are designed for loads up to 5000 kg. The right capacity is your heaviest regular load plus the trolley, with a clear safety margin.
What details do you need for a goods lift design?
Share the load, number of floors, floor-to-floor height, shaft and pit space, door width and power supply. A site survey then fixes the final design.
श्रीगंगानगर और झुंझुनू में गुड्स लिफ्ट कौन बनाता है?
आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, 1998 से श्रीगंगानगर, झुंझुनू और पूरे राजस्थान के लिए हाइड्रोलिक और इंडस्ट्रियल गुड्स लिफ्ट डिज़ाइन, निर्माण और इंस्टॉल करता है।
गुड्स लिफ्ट के लिए साइट सर्वे कैसे बुक करें?
+91 9799108009 या +91 9413341806 पर कॉल करें, या contact@rkengineeringworks.in पर ईमेल करें। हमारी टीम लोड, मंज़िल और जगह देखकर सही लिफ्ट बताती है।
Request an engineering consultation
Planning a goods lift in Sri Ganganagar or Jhunjhunu? Request an engineering consultation or book a site survey: call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. R K Engineering Works, 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013. Contact page.