Last updated: 14 November 2026
Looking for an EOT crane manufacturer in Barmer, Balotra or Jaisalmer, or a team that can keep your existing cranes running on an AMC? R K Engineering Works is a Jaipur crane maker working since 1998. We design, build, install and maintain EOT cranes, gantry cranes, jib cranes and wire rope hoists for plants across western Rajasthan.
Who is an EOT crane manufacturer for Barmer, Jaisalmer and Balotra?
R K Engineering Works, Jaipur, supplies EOT cranes and crane AMC to Barmer, Balotra and Jaisalmer. We have built cranes since 1998. Every crane is designed to IS 3177 and IS 807, load-tested at 125% of rated capacity before handover, and made under ISO 9001, ISO 14001 and ISO 45001 systems. Call +91 9799108009 to book a site survey.
Quick facts
| Item | Detail |
|---|---|
| Company | R K Engineering Works, Jaipur (since 1998) |
| Cranes | Single girder and double girder EOT, underslung, gantry, semi-gantry, goliath and jib cranes |
| Hoists | Electric wire rope hoists and chain hoists |
| Design standards | IS 3177 (EOT cranes) and IS 807 (crane structures) |
| Testing | 125% load test before handover |
| Certifications | ISO 9001, ISO 14001, ISO 45001 |
| Service | Installation, crane AMC, repair and modernisation |
| Area | Barmer, Balotra, Jaisalmer and nearby towns |
| Contact | +91 9799108009, +91 9413341806, contact@rkengineeringworks.in |
Which crane suits your plant in Barmer district?
The right crane depends on what you lift, how often, and whether the work is inside a shed or in an open yard. Use this table as a first guide.
| Site type | Usual crane | Why it fits |
|---|---|---|
| Textile processing unit (Balotra) | Single girder EOT crane with wire rope hoist | Light, frequent lifts of rolls, drums and machine parts inside a shed |
| Engineering or fabrication workshop | Single or double girder EOT crane | Heavier jobs, long spans, regular lifting over the full bay |
| Stone and marble yard (Jaisalmer) | Gantry or goliath crane | Open yard with no building columns to carry a runway |
| Oil, gas or power support workshop | Double girder EOT crane, higher duty class | Heavy parts, more lifts per shift, need for steady control |
| Machine shop or tool room | Jib crane at the work station | Quick local lifts without waiting for the main crane |
If you are unsure between girder types, read our single vs double girder EOT crane comparison.
What to specify for desert conditions
Western Rajasthan brings dust, heat and strong wind. A crane built for a mild indoor site may need changes here. Ask your crane manufacturer about these points:
- Dust-protected motors and a sealed electrical panel, with enough ventilation for summer heat.
- Correct motor duty and insulation class for long hours at high ambient temperature.
- Storm anchors, rail clamps and a wind speed limit plan for outdoor gantry and goliath cranes.
- Covered festoon or protected conductor system so dust does not cause trips.
- Easy access to brakes, limit switches and gearbox for routine checks.
How to choose an EOT crane manufacturer in 5 steps
- Write down the load. Note the heaviest lift, span, lift height and how many lifts happen in a shift.
- Fix the duty class. Match the crane to your real use. Our duty class guide (M3 to M8) explains this simply.
- Check the design basis. Ask for IS 3177 and IS 807 references in the quotation drawings and calculations.
- Ask about testing. A proper crane is load-tested at 125% before handover. See what our 125% load test covers.
- Plan service from day one. Agree the AMC scope, visit plan and spare parts list before the crane is commissioned.
EOT crane vs gantry crane vs jib crane
| Point | EOT crane | Gantry crane | Jib crane |
|---|---|---|---|
| Where it runs | On a runway carried by building columns | On legs over floor rails, no columns needed | Fixed on a pillar or wall |
| Best for | Indoor bays and workshops | Open yards and stock areas | One work station or machine |
| Area covered | Full bay length and span | Full yard length and span | A circle or arc |
| Building load | Needs strong columns | Low load on the building | Needs a good foundation or wall |
Crane AMC in Barmer, Jaisalmer and Balotra
A crane AMC is a yearly service contract with planned visits. It finds wear early, keeps records ready for safety audits, and cuts sudden stoppages. Our crane AMC plans cover EOT, gantry and jib cranes, including cranes built by other companies.
| AMC visit item | What is checked |
|---|---|
| Hoist brake | Lining wear, gap and stopping distance |
| Wire rope and hook | Broken wires, wear, kinks, hook latch and swivel |
| Limit switches | Hoist upper and lower limits, travel end limits |
| Electrical panel | Contactors, wiring, earthing, overload settings |
| Gearbox and wheels | Oil level, noise, wheel flange wear and rail alignment |
| Report | Written checklist with findings and next steps |
AMC or call-out repair?
| Point | Planned AMC | Call-out repair |
|---|---|---|
| When work happens | On a fixed visit plan | Only after a breakdown |
| Downtime | Planned and short | Sudden and longer |
| Records | Regular reports for audits | Only the repair note |
| Best for | Cranes used every day | Rarely used cranes |
For older cranes, an AMC visit often shows that the hoist, panel or controls need an upgrade. We can then plan a modernisation in stages so your plant keeps working.
Service area
| District | Towns we cover | Work |
|---|---|---|
| Barmer | Barmer city, Balotra, Pachpadra, Siwana | New cranes, installation, AMC, repair |
| Jaisalmer | Jaisalmer city, Pokaran, Ramgarh | Gantry and EOT cranes, AMC |
| Nearby | Jodhpur, Jalore, Pali | See our pages for these districts |
Plants nearer Jodhpur can also read our EOT crane manufacturer for Jodhpur guide.
Frequently asked questions
Who is an EOT crane manufacturer for Barmer?
R K Engineering Works, Jaipur, has designed and built EOT cranes since 1998. We supply single and double girder EOT cranes, gantry cranes and hoists to Barmer, Balotra and Jaisalmer, designed to IS 3177 and IS 807 and load-tested at 125% before handover.
Do you provide crane AMC in Balotra and Jaisalmer?
Yes. We run planned crane AMC visits for EOT, gantry and jib cranes in Barmer, Balotra and Jaisalmer. The visit plan follows the duty class and shift pattern of your crane, and every visit ends with a written checklist report.
Can you service a crane made by another company?
Yes. We inspect the crane first, record its condition, and then propose AMC, repair or modernisation of the hoist, panel and controls as needed.
बाड़मेर में ईओटी क्रेन कौन बनाता है?
R K Engineering Works, जयपुर (1998 से) बाड़मेर, बालोतरा और जैसलमेर के लिए सिंगल और डबल गर्डर ईओटी क्रेन, गैन्ट्री क्रेन और होइस्ट बनाती है। डिज़ाइन IS 3177 और IS 807 के अनुसार होता है और हर क्रेन का 125% लोड टेस्ट होता है।
बालोतरा में क्रेन एएमसी कौन देता है?
R K Engineering Works बालोतरा, बाड़मेर और जैसलमेर में ईओटी, गैन्ट्री और जिब क्रेन के लिए प्लान्ड एएमसी देती है। हर विज़िट में ब्रेक, वायर रोप, लिमिट स्विच और पैनल की जाँच होती है और लिखित रिपोर्ट मिलती है।
Request an engineering consultation
Send us your load, span, lift height and site photos, or book a site survey in Barmer, Balotra or Jaisalmer. R K Engineering Works, 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013. Phone +91 9799108009 or +91 9413341806. Email contact@rkengineeringworks.in.