आटा चक्की और फ्लोर मिल के लिए गुड्स लिफ्ट चाहिए? Need a goods lift for a flour mill in Sri Ganganagar or Churu? R K Engineering Works, VKI Area, Jaipur, designs, builds and installs goods lifts for atta chakki units, flour mills, dal mills and grain stores in Sri Ganganagar, Churu and nearby towns. We have worked in material handling since 1998 under ISO 9001, ISO 14001 and ISO 45001, and design lifts to IS 14665 where relevant.
सीधा जवाब: आटा चक्की में गेहूं की बोरियां ऊपर की मंज़िल पर और आटे की बोरियां नीचे लाने के लिए हाइड्रोलिक या रोप-टाइप गुड्स लिफ्ट सबसे सही रहती है। लिफ्ट का साइज़ ट्रॉली और बोरियों के ढेर के हिसाब से, और क्षमता सबसे भारी लोड के हिसाब से तय होती है। Last updated: 16 Nov 2026
Why does a flour mill need a goods lift?
An atta chakki or roller flour mill moves the same heavy loads every day. Wheat bags go up to the cleaning and grinding floor. Flour, suji, maida and bran bags come down to packing and dispatch. Many mills in Sri Ganganagar, Hanumangarh, Churu, Sardarshahar and Ratangarh run on two or three floors, and workers still carry bags on stairs or use a rope pulley.
A goods lift moves a full trolley of bags in one trip. It cuts manual carrying, keeps stairs clear and makes the flow of the mill steady from intake to dispatch. It also keeps workers off the stairs with heavy loads, which is the biggest safety gain.
Goods lift for flour mill: which type fits your mill?
Two lift types suit most mills. The site survey decides which one fits your building.
| Point | Hydraulic goods lift | Rope-type (traction) goods lift |
|---|---|---|
| How it lifts | Oil-filled cylinder pushes the car up | Motor and gearbox wind wire ropes on a drum or sheave |
| Floors | Best for ground plus one or two floors | Suits more floors and taller buildings |
| Machine room | Small power pack beside the shaft | Machine at the top or bottom of the shaft |
| Ride | Smooth start and stop | Steady, with good speed over height |
| Best for | Atta chakki and small flour mills | Larger roller flour mills and grain stores |
For a deeper side-by-side view of goods lift builds, read our industrial goods lift guide.
आटा चक्की के लिए गुड्स लिफ्ट कैसे चुनें? (How to choose)
- सबसे भारी लोड लिखें: एक बार में कितनी बोरियां और ट्रॉली का वज़न। Write down the heaviest load: bags per trip plus the trolley.
- प्लेटफॉर्म का साइज़ ट्रॉली या पैलेट के हिसाब से रखें। Size the platform to your trolley or pallet, with space for one worker.
- कितनी मंज़िल और हर मंज़िल की ऊंचाई नापें। Count the floors and measure the floor-to-floor height.
- गड्ढे (पिट) और ऊपर की जगह (हेडरूम) की जांच करें। Check the pit depth and the headroom above the top floor.
- दिन में कितने चक्कर लगेंगे, यह बताएं। Tell us how many trips you make per shift.
- बिजली सप्लाई देखें: थ्री-फेज़ लाइन उपलब्ध है या नहीं। Check the power supply, normally a three-phase line.
Pit and headroom are the two points that most often change a design. See goods lift pit and headroom planning before you finalise the civil work.
What specification should a flour mill goods lift have?
| Spec point | What to decide | Why it matters in a flour mill |
|---|---|---|
| Rated load | Heaviest regular load: bags plus trolley | Sets the cylinder or rope, car frame and guide rails |
| Platform size | Trolley or pallet size plus working space | Bags must fit without stacking too high |
| Floors and travel | Number of stops and total travel height | Decides hydraulic or rope type |
| Car and doors | Mesh or sheet car, collapsible or swing doors | Mesh keeps air moving; doors keep bags from falling |
| Flooring | Chequered plate floor | Grip for trolley wheels and workers |
| Dust protection | Covered panel and sealed push-buttons | Flour dust gets into open switches and contacts |
| Controls | Push-button stations at each floor | Calls the car from any floor |
| Safety devices | Door interlocks, limit switches, overload sensing, emergency stop | Car moves only when doors are closed |
Which safety features must a flour mill goods lift have?
- Door interlocks so the car moves only when all doors are shut.
- Upper and lower limit switches and a final limit.
- Overload sensing that stops the lift when the load is too high.
- Emergency stop button in the car area and at the landings.
- Safety gear or a rupture valve (hydraulic type) to hold the car if something fails.
- Dust-protected electrical panel, because flour dust can build up on contacts.
- Clear rated-load board at every landing, in Hindi and English.
- Goods lifts carry goods only. No person should ride with the load.
Read more in hydraulic goods lift safety features.
Flour mill goods lift in Sri Ganganagar and Churu: who we serve
Sri Ganganagar and Hanumangarh form a large wheat belt, with many atta chakki units, roller flour mills and grain stores near the mandis. Churu district has flour and dal mills, cattle feed units and warehouses in Churu, Sardarshahar, Ratangarh, Sujangarh and Rajgarh. We serve these towns from our Jaipur works with our own installation team.
| District | Towns we serve | Typical flour mill lift job |
|---|---|---|
| Sri Ganganagar | Sri Ganganagar, Suratgarh, Raisinghnagar, Anupgarh, Padampur, Kesrisinghpur | Wheat bags up to the grinding floor, flour bags down to packing |
| Hanumangarh | Hanumangarh, Pilibanga, Sangaria, Nohar, Bhadra | Grain store to mill floor transfer |
| Churu | Churu, Sardarshahar, Ratangarh, Sujangarh, Rajgarh (Sadulpur), Taranagar | Flour, dal and cattle feed bags between floors |
For goods lifts in shops, warehouses and factories in this belt, also see goods lift manufacturer for Sri Ganganagar and Jhunjhunu. For hoists and winches in Churu, see electric hoist and winch supplier for Churu and Jhunjhunu.
How is a flour mill goods lift project done?
- Site survey – floors, pit, headroom, wall or structure for guide rails, power and access.
- Design – lift type, rated load, platform, car, doors and safety devices, designed to IS 14665 where relevant.
- Civil drawing – pit, shaft and openings shared with your civil contractor.
- Fabrication – at our VKI Area, Jaipur works.
- Installation – guide rails, car, power pack or machine, doors and wiring by our team.
- Testing and handover – trial runs at each floor, safety device checks, operator briefing and documents.
How do you keep a goods lift running in a dusty flour mill?
- Clean flour dust from the panel, push-buttons and limit switches every week.
- Check door interlocks and the emergency stop every day before work.
- Keep the pit clean and dry; bran and flour collect there.
- Check hydraulic oil level, or rope and brake condition, at each service visit.
- Book regular service so small faults do not stop the mill in peak season.
FAQs
Which goods lift is right for an atta chakki or flour mill?
For ground plus one or two floors, a hydraulic goods lift usually fits best. For more floors or a taller building, a rope-type goods lift is used. The site survey confirms the type, rated load and platform size.
Who makes goods lifts for flour mills in Sri Ganganagar and Churu?
R K Engineering Works, 29, Udyog Vihar, VKI Area, Jaipur, designs, builds and installs goods lifts for atta chakki units, flour mills and grain stores in Sri Ganganagar, Hanumangarh, Churu and nearby towns. We have worked in material handling since 1998.
Does flour dust affect a goods lift?
Yes. Flour dust can settle on switches and contacts. A dust-protected panel, sealed push-buttons and weekly cleaning keep the lift working safely.
What details are needed to design a flour mill goods lift?
Send the heaviest load per trip, trolley or pallet size, number of floors, floor-to-floor height, pit and headroom space, trips per shift and the power supply. A site survey then fixes the design.
श्रीगंगानगर में आटा चक्की के लिए गुड्स लिफ्ट कौन बनाता है?
आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, 1998 से श्रीगंगानगर, हनुमानगढ़ और चूरू की आटा चक्की और फ्लोर मिल के लिए गुड्स लिफ्ट डिज़ाइन, निर्माण और इंस्टॉल करता है।
चूरू की फ्लोर मिल में कौन सी गुड्स लिफ्ट सही रहेगी?
दो मंज़िल तक की मिल में हाइड्रोलिक गुड्स लिफ्ट और ज़्यादा मंज़िलों के लिए रोप-टाइप गुड्स लिफ्ट सही रहती है। साइट सर्वे के बाद क्षमता और प्लेटफॉर्म तय होता है।
Request an engineering consultation
Planning a goods lift for your atta chakki or flour mill in Sri Ganganagar or Churu? Request an engineering consultation or book a site survey: call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. R K Engineering Works, 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013.
