EOT crane spare parts and service in Kota are supplied by R K Engineering Works from our works at VKI Area, Jaipur. We supply the parts that wear fastest on single and double girder EOT cranes: brakes, wheels, wire rope, hooks, limit switches, pendants, contactors and gearbox parts. Our team also inspects, repairs and load-tests cranes at plants in Kota, Bundi, Baran and Jhalawar.
This guide shows which spares to keep, how to order the right part the first time, and when a repair should become a full service visit. Last updated: 16 Nov 2026.
Which EOT crane spare parts should a Kota plant keep in stock?
A crane that stops for one small part can stop a whole bay. Most breakdowns we see in the Kota belt come from a short list of wear parts. Keep these on the shelf, and plan the rest through an AMC.
| Part | What it does | Typical wear sign | Keep in stock? |
|---|---|---|---|
| Brake liner / thruster brake | Holds the load and stops motion | Load creeps down, long stopping distance | Yes (critical) |
| Wheel and wheel bearing | Carries the crane on the rail | Flange wear, noise, crabbing on rail | Yes, for busy cranes |
| Wire rope | Lifts the load from the drum | Broken wires, kinks, thinning | Yes (one full length) |
| Hook block and bearing | Holds the load | Throat opening, rough rotation | Plan through AMC |
| Limit switch (hoist and travel) | Stops over-hoisting and end-travel | Fails to trip, loose lever | Yes (critical) |
| Pendant push button / radio remote | Operator control | Sticky buttons, cable damage | Yes |
| Contactors and overload relay | Switch motors in the panel | Pitted contacts, chattering | Yes |
| Current collector / DSL shoe | Feeds power to the crane | Sparking, uneven wear | Yes |
| Gearbox oil seals and bearings | Keep the drive running | Oil leaks, heat, noise | Plan through AMC |
How do you order the right EOT crane spare part?
Wrong spares waste days. Follow these steps and the first part we send should fit.
- Read the nameplate. Note capacity, span, lift height, duty class (for example M5 under IS 3177 / IS 807) and the year of make.
- Note the old part details. Part number, size, rope diameter and construction, wheel diameter, brake size, motor kW and frame.
- Take clear photos. One close-up and one wide photo showing where the part sits on the crane.
- Describe the fault. What happens, when it started, and how many shifts the crane runs.
- Share it with us. Send the details to contact@rkengineeringworks.in or call +91 9799108009 / +91 9413341806.
- Plan the fitting. Our engineer can fit the part, test the crane and record the work in your maintenance log.
Repair, replace or modernise: how to decide
Not every fault needs a new part, and not every old crane should keep getting new parts. Use this table as a first guide; our site survey confirms it.
| Situation | Best step | Why |
|---|---|---|
| One wear part failed, crane otherwise sound | Replace the spare | Fast return to work |
| Same part fails again and again | Inspect alignment, rail and duty class | The cause is often rail wear or overload, not the part |
| Old contactor panel, jerky motion, frequent trips | Panel upgrade with VFD | Smoother motion, less wear on gearbox and wheels |
| Crane now lifts more often than it was designed for | Re-rating or modernisation | Duty class must match real use |
| Cracks on girder or end carriage welds | Stop and inspect at once | Structural safety comes first |
For deeper work, see our guide to EOT crane modernisation and the 125% crane load test.
What does an EOT crane service visit in Kota include?
- Visual check of girders, end carriages, rails and rail clamps.
- Brake test on hoist and travel motions, and liner gap check.
- Wire rope inspection along its full length, and drum and sheave check.
- Hook, hook block and safety latch check.
- Limit switch and emergency stop test.
- Panel check: contactors, relays, terminals, earthing and cable condition.
- Gearbox oil level, leaks, noise and temperature check.
- Written report with parts to replace now and parts to plan for.
Plants that want regular visits can move to an annual crane AMC for Kota, Bundi, Baran and Jhalawar. If you need a new crane, see our EOT crane manufacturer page for Kota.
OEM-matched spares vs generic spares
| Point | Engineered / matched spare | Generic off-the-shelf part |
|---|---|---|
| Fit | Checked against your crane data | May need site changes |
| Duty class match | Selected for your duty class | Often not stated |
| Wire rope | Correct diameter, construction and length | Construction may differ from drum design |
| Brakes and wheels | Sized for load and speed | May wear faster |
| Records | Entered in your crane history | Usually no record |
| Life and downtime | Longer life, fewer stoppages | More frequent change-outs |
Gearbox parts deserve special care. If a gearbox is worn beyond repair, a matched replacement keeps the hoist speed and braking right. See our helical and worm gearbox guide.
Industries we support in the Kota region
Kota and the Hadoti belt run cranes in chemical and fertiliser plants, power stations, stone and cement units, textile and engineering workshops, and warehouses at Ranpur and the RIICO areas. Each has a different wear pattern: dust in cement and stone units wears brakes and collectors, while heat and long shifts load gearboxes and motors. We plan spares to match your work, not a fixed list.
FAQs
Who supplies EOT crane spare parts and service in Kota?
R K Engineering Works supplies EOT crane spare parts and service in Kota, Bundi, Baran and Jhalawar from its works at VKI Area, Jaipur. We have built and serviced cranes since 1998 and work to ISO 9001, ISO 14001 and ISO 45001 systems.
Which EOT crane spare parts fail most often?
Brake liners, wheel and wheel bearings, wire rope, contactors, limit switches, pendant push buttons and current collectors wear fastest. Keep these as critical spares so a breakdown does not stop production.
Can you supply spares for a crane made by another company?
Yes, in most cases. Share the crane nameplate, capacity, span, old part number and clear photos. Our engineers match or re-engineer the part to suit your crane and its duty class.
Is a load test needed after major spare part replacement?
After a change to the hoist, hook, rope drum, brake or main girder, a proof load test is good practice. Our cranes are load-tested at 125% of rated capacity before handover, in line with IS 3177 practice.
कोटा में ईओटी क्रेन स्पेयर पार्ट्स कहाँ मिलेंगे?
R K Engineering Works, जयपुर (VKI एरिया) से कोटा, बूंदी, बारां और झालावाड़ के लिए ईओटी क्रेन स्पेयर पार्ट्स, ब्रेक, व्हील, वायर रोप, लिमिट स्विच और पैनल पार्ट्स भेजता है। कॉल करें +91 9799108009।
क्या आप कोटा में क्रेन की सर्विस और एएमसी भी करते हैं?
हाँ। हम कोटा क्षेत्र में ईओटी क्रेन की जाँच, ब्रेकडाउन रिपेयर, स्पेयर बदलना और वार्षिक रखरखाव (AMC) करते हैं। साइट सर्वे बुक करने के लिए contact@rkengineeringworks.in पर लिखें।
Request an engineering consultation
Send your crane nameplate and fault details, or book a site survey in Kota, Bundi, Baran or Jhalawar. Call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. R K Engineering Works, 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013.
