Looking for an underslung crane manufacturer for Dausa or Sirohi? R K Engineering Works, VKI Area, Jaipur, designs, builds, installs and load-tests underslung cranes for factories, workshops and warehouses in Dausa, Sirohi and Abu Road. We have built cranes since 1998, design to IS 3177 and IS 807, and load-test every crane at 125% before handover.
This guide explains in simple words what an underslung crane is, when it is the right choice, what to measure, and how a project runs from survey to handover. Last updated: 16 Nov 2026
What is an underslung crane?
An underslung crane, also called an underhung crane, hangs from the roof structure. Its end carriages run on the bottom flange of runway beams that are fixed to the roof trusses. The crane does not need column brackets or a separate gantry girder on columns.
Because the crane hangs below the runway, it uses the space under the roof well. It suits sheds with low headroom, sheds where columns are not designed for crane loads, and bays that need a crane to cover the full width close to the walls.
Underslung crane manufacturer for Dausa and Sirohi: who we serve
Dausa has stone and marble units, food processing plants, cold stores and workshops along the Jaipur–Agra corridor. Sirohi and Abu Road have granite and marble processing, fabrication shops and warehouses. Many of these sheds have light steel roofs and low eaves, where an underslung crane fits better than a top-running crane.
We serve Dausa, Bandikui, Lalsot, Mahwa, Sikrai, Sirohi, Abu Road, Pindwara, Sheoganj and Reodar from our Jaipur works, with our own installation team.
Underslung vs top-running EOT crane: which one fits?
| Point | Underslung crane | Top-running EOT crane |
|---|---|---|
| Where it runs | On the bottom flange of beams hung from the roof | On rails on top of gantry girders on columns |
| Headroom | Good where roof height is limited | Needs more space above the rail |
| Building support | Roof trusses must be checked for crane loads | Columns and brackets carry the loads |
| Load range | Light to medium loads | Light to very heavy loads |
| Coverage | Can reach close to walls | Hook stops short of the end walls |
| Best for | Workshops, assembly, warehouses, stone cutting sheds | Steel, cement, heavy fabrication |
If your loads are heavy and the duty is high, read our single vs double girder EOT crane guide before you decide.
What specification should an underslung crane have?
Use this spec sheet when you ask any supplier for a design. Each point is fixed after the site survey.
| Spec point | What to decide | Why it matters |
|---|---|---|
| Safe working load | Heaviest regular load plus lifting gear | Sets the hoist, girder and roof check |
| Span | Distance between runway beams | Sets girder size and deflection |
| Height under truss | Clear height from floor to runway beam | Sets the lift height you can get |
| Duty class | Lifts per hour and load spectrum, as per IS 3177 | Sets hoist and gearbox life |
| Hoist | Electric wire rope hoist or chain hoist | Load, speed and duty decide it |
| Speeds | Hoist, cross travel and long travel | Two-speed or soft start reduces swing |
| Control | Pendant or radio remote | Operator stays clear of the load |
| Power feed | Shrouded busbar or festoon cable | Safe, steady supply along the runway |
For help with these numbers, see how to choose crane capacity, span and lift height.
How to choose an underslung crane: 6 steps
- Write down the heaviest load and how many lifts you make in a shift.
- Measure the bay width, the length of travel and the clear height under the roof truss.
- Share the roof truss drawing or clear photos. The roof must be checked for the crane wheel loads before design.
- Pick the hoist type. Read wire rope hoist vs chain hoist for the difference.
- Fix the duty class from your lift log, as per IS 3177.
- Book a site survey. We confirm all numbers on site and give a design for approval.
Which safety features should an underslung crane have?
- Upper and lower hoist limit switches
- Long travel and cross travel end stops with buffers
- Overload protection on the hoist
- Emergency stop on the pendant or remote
- Brakes on hoist and travel motions
- Warning hooter and flasher
- Clear safe working load marking on the girder
- Earthing of the crane and runway
Before handover we carry out a 125% load test and give the test record.
How is an underslung crane project planned and installed?
- Site survey – roof, runway path, height, power and access.
- Design – girder, end carriages, hoist and runway, with a roof load check.
- Fabrication – at our VKI Area, Jaipur works with shop checks.
- Dispatch – to Dausa, Sirohi or Abu Road.
- Installation – runway, crane and power feed fitted by our team.
- Testing – no-load trial, 125% load test, operator briefing and handover documents.
For regular upkeep after handover, see our crane AMC guide.
Do you also build other cranes for these districts?
Yes. Many plants that need an underslung crane also need a jib crane at a machine, a hoist on a monorail, or a gantry crane in the open yard. Ask us about gantry and goliath cranes for yards too.
FAQs
Who is an underslung crane manufacturer for Dausa and Sirohi?
R K Engineering Works, 29, Udyog Vihar, VKI Area, Jaipur, designs, builds, installs and load-tests underslung cranes for factories and warehouses in Dausa, Sirohi, Abu Road and nearby towns. We have built cranes since 1998 under ISO 9001, ISO 14001 and ISO 45001.
When should I choose an underslung crane instead of a top-running EOT crane?
Choose an underslung crane when the shed has low headroom, light roof trusses that can carry hanging rails, or no space for column brackets. Choose a top-running EOT crane for heavy loads and high duty where strong columns are available.
What details do you need to design an underslung crane?
Send the heaviest load, the bay width, the roof truss drawing or photos, the height under the truss, the length of travel, lifts per shift and the power supply. A site survey then fixes the design.
Is every underslung crane load-tested?
Yes. Every crane we hand over is load-tested at 125% of its safe working load, with test records and an operator briefing.
दौसा में अंडरस्लंग क्रेन कौन बनाता है?
आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, 1998 से दौसा, सिरोही, आबू रोड और पूरे राजस्थान के लिए अंडरस्लंग क्रेन डिज़ाइन, निर्माण, इंस्टॉल और 125% लोड टेस्ट करता है।
सिरोही में अंडरस्लंग क्रेन कब सही है?
जब शेड की ऊंचाई कम हो या कॉलम पर रनवे लगाने की जगह न हो, तब छत की ट्रस से लटकी रेल पर चलने वाली अंडरस्लंग क्रेन सही रहती है।
Request an engineering consultation
Planning an underslung crane in Dausa or Sirohi? Request an engineering consultation or book a site survey: call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. R K Engineering Works, 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013.
