Jib Crane Manufacturer for Kota and Bikaner

Last updated: 18 November 2026

Who makes jib cranes for factories in Kota and Bikaner?

R K Engineering Works, VKI Area, Jaipur, designs and builds jib cranes for plants in Kota, Bikaner and all of Rajasthan. We build pillar-mounted, wall-mounted and wall-travelling jib cranes with an electric wire rope hoist or chain hoist. Each crane is load-tested at 125% of its rated load before handover. We have worked since 1998 and hold ISO 9001, 14001 and 45001.

What is a jib crane?

A jib crane is a small crane with one horizontal arm (the jib). A hoist runs on the arm. The arm turns on a pillar or a wall bracket. It serves one work area, like a machine, a loading point or an assembly table.

Jib crane types

TypeMountingSlewBest for
Pillar-mountedOwn column on a foundationUp to 360 degreesOpen floor, loading points, machine shops
Wall-mountedBracket on a building columnUp to 180 degreesWork cells along a wall, no floor space used
Wall-travellingRuns on a rail along the wallArm fixed, crane travelsLong lines below an EOT crane
ArticulatedPillar or wall, two armsReaches around cornersTight spaces, around machines

How to choose a jib crane: 5 steps

  1. Load: take the heaviest item plus any lifting tackle.
  2. Reach (outreach): measure from the pillar centre to the farthest lift point.
  3. Height under arm: check roof height, beams and the tallest part you lift.
  4. Slew angle: 180 degrees near a wall, 270-360 degrees in open floor.
  5. Hoist: chain hoist for light, low-duty work; wire rope hoist for heavier loads and more lifts per hour.

Standards we design to

We design structure and mechanism to IS 807 and IS 3177 duty classes where they apply, with IS 2062 steel. Electrical control follows IEC 60204-32 for hoisting machines. The foundation design is checked for the overturning moment of the pillar.

Kota and Bikaner use cases

DistrictTypical industriesCommon jib use
KotaChemical, fertiliser, engineering, stonePump and motor handling, stone slab loading
BikanerWool, ceramics, food processing, gypsumBale and bag handling, die and mould change

Jib crane vs EOT crane

PointJib craneEOT crane
Area servedOne circle or arcWhole bay
Building supportPillar or one columnGantry girders on columns
Best useSingle workstationFull shop movement

कोटा और बीकानेर में जिब क्रेन (Hindi)

आर के इंजीनियरिंग वर्क्स, जयपुर, कोटा और बीकानेर के कारखानों के लिए पिलर और वॉल माउंटेड जिब क्रेन बनाती है। हर क्रेन की 125% लोड टेस्टिंग होती है। क्रेन चुनने से पहले भार, पहुंच (आउटरीच), ऊंचाई और घूमने का कोण तय करें।

FAQs

How long does a jib crane take to deliver to Kota or Bikaner?

Time depends on capacity and type. We confirm the schedule after the site survey and drawing approval.

Does a pillar jib crane need a foundation?

Yes. A pillar jib crane needs a designed RCC foundation, or anchor bolts on a floor that we check for strength.

Chain hoist or wire rope hoist on a jib crane?

A chain hoist suits light loads and few lifts per hour. A wire rope hoist suits heavier loads, faster lifting and more lifts per shift.

Do you test the jib crane before handover?

Yes. Every crane is load-tested at 125% of its rated load and the report is given with the crane.

क्या आप बीकानेर में जिब क्रेन लगाते हैं?

हां, हम बीकानेर, कोटा और पूरे राजस्थान में जिब क्रेन की सप्लाई और इंस्टॉलेशन करते हैं।

Request an engineering consultation or book a site survey: +91 9799108009, +91 9413341806, contact@rkengineeringworks.in. Related: single vs double girder EOT crane, wire rope hoist vs chain hoist, EOT crane manufacturer Kota.

Leave a Comment

Your email address will not be published. Required fields are marked *