Last updated: 21 November 2026
Who makes EOT cranes for Bikaner plants?
R K Engineering Works, VKI Area, Jaipur, designs, builds and installs single and double girder EOT cranes for plants in Bikaner district. Cranes are designed to IS 807 and IS 3177, load-tested at 125% of rated load before handover, and supplied with installation and AMC support. The company has worked since 1998 and holds ISO 9001, 14001 and 45001.
Last updated: 22 November 2026
How do you shortlist an EOT crane supplier for Bikaner?
Shortlist a Bikaner EOT crane supplier on five checks: design to IS 807 and IS 3177, the right duty class, a 125% load test at your site, dust and heat protection, and service after handover. R K Engineering Works, VKI Area, Jaipur, about 330 km from Bikaner, makes single and double girder EOT cranes since 1998 and meets all five.
| Check | Why it matters in Bikaner | R K Engineering Works |
|---|---|---|
| Design code | Safe girder, hoist and wheel sizing | IS 807 and IS 3177 |
| Duty class | Kiln and press shifts wear cranes faster | M3 to M5 chosen from lifts per hour |
| Load test | Proves the crane on your own rails | 125% load test at site, report handed over |
| Dust and heat | Bikaner summers pass 45 °C with fine dust | IP55 motors, sealed panel, covered power supply |
| Service | Downtime stops loading and dispatch | Site visits from Jaipur, crane AMC on request |
| Quality system | Shows a fixed way of working | ISO 9001, ISO 14001, ISO 45001 |
4 steps from enquiry to a working crane in Bikaner
- Share capacity, span, hook height, shed length and lifts per hour.
- Site survey of rails, gantry girders and power supply.
- Design, fabrication and shop checks in Jaipur.
- Erection, 125% load test and operator handover at your Bikaner plant.
बीकानेर: EOT क्रेन सप्लायर कैसे चुनें (हिंदी)
IS 807 और IS 3177 के अनुसार डिज़ाइन, सही ड्यूटी क्लास, साइट पर 125% लोड टेस्ट, धूल और गर्मी से सुरक्षा, और बाद की सर्विस, ये पांच बातें जांचें। आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, 1998 से EOT क्रेन बनाती है। कॉल करें +91 9799108009 या ईमेल contact@rkengineeringworks.in.
Book a site survey in Bikaner, Nokha, Kolayat or Karni Industrial Area: call +91 9799108009, +91 9413341806 or email contact@rkengineeringworks.in. Related: single vs double girder EOT crane, crane AMC.
This guide is for plant heads, purchase managers and maintenance engineers in Bikaner city, Karni Industrial Area, Bichhwal, Khara, Rani Bazar industrial area, Nokha, Kolayat, Lunkaransar and Shri Dungargarh. It explains in plain words how to pick the right EOT crane, what to tell the maker and which checks matter. For the full Jaipur guide see EOT crane manufacturer Jaipur (main guide).
Where are EOT cranes used in Bikaner?
Bikaner plants lift heavy, dusty and hot material every day. An EOT (Electric Overhead Travelling) crane runs on two rails above the shed floor, so the floor stays clear for trucks, forklifts and people.
| Bikaner work | What the crane lifts | Usual crane type |
|---|---|---|
| Gypsum and clay processing | Jumbo bags, crusher and mill parts | Single girder, M3–M4 |
| Ceramic and tile units | Moulds, kiln cars, press dies | Double girder, M5 |
| Woollen and textile mills | Bales, beams, machine parts | Single girder, M3 |
| Food and namkeen units | Raw material bags, boiler parts in maintenance | Single girder or underslung, M3 |
| Fabrication and engineering workshops | Plates, structures, machine bodies | Single or double girder, M4–M5 |
| Power plant and solar yard stores | Transformers, motors, spares | Double girder, M4–M5 |
Single girder or double girder EOT crane?
| Point | Single girder EOT | Double girder EOT |
|---|---|---|
| Bridge | One main girder | Two main girders |
| Hoist | Runs under the girder | Runs on a crab on top of both girders |
| Hook height | A little lower | Higher |
| Best for | Stores, workshops, light to medium loads | Heavy loads, long span, continuous production |
| Load on shed | Lower | Higher; needs stronger gantry girders |
Full comparison: single vs double girder EOT crane.
6 steps to choose an EOT crane in Bikaner
- Fix the capacity: heaviest load plus hook, slings and lifting tackle.
- Measure the span: rail centre to rail centre.
- State the hook height: floor to the highest hook point you need.
- Pick the duty class: lifts per hour and how often the load is near full; M3 to M8 as per IS 3177. See the duty class guide.
- Plan for dust and heat: IP55 motors, class F insulation, sealed panel, covered DSL or festoon.
- Check the shed: gantry girders, columns and rails; 415 V, 3 phase supply point.
Safety items every Bikaner EOT crane must have
- Upper and lower hoist limit switches
- Long travel and cross travel limit switches
- Overload protection
- Electro-mechanical brake on every motion
- Pendant or radio remote with emergency stop
- Buffers and end stoppers at rail ends
- Full earthing and protected DSL or festoon cable
- 125% load test and report before handover — see what a 125% load test checks
Key facts at a glance
| Point | Detail |
|---|---|
| Maker | R K Engineering Works, 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013 |
| Working since | 1998 |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
| Design standards | IS 807 (structure), IS 3177 (mechanisms and duty class) |
| Load test | 125% of rated load, every crane |
| Types | Single girder, double girder, underslung, gantry, semi-gantry |
| Bikaner service area | Bikaner city, Karni, Bichhwal, Khara, Nokha, Kolayat, Lunkaransar, Shri Dungargarh |
| Support | Installation, AMC, modernisation of old cranes, spare parts |
Care after installation
In Bikaner dust, check brakes, wire rope, hook and limit switches every month and clean the panel and motor fins. Change gearbox oil on time and check rail alignment once a year. R K Engineering Works also gives crane AMC and EOT crane modernisation for old cranes. For lighter lifts near one machine, see jib cranes for Kota and Bikaner.
बीकानेर में EOT क्रेन कौन बनाता है? (हिंदी)
आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, 1998 से सिंगल और डबल गर्डर EOT क्रेन डिज़ाइन करती, बनाती और लगाती है। बीकानेर, करणी, बीछवाल, खारा, नोखा और कोलायत के प्लांट के लिए क्रेन IS 807 और IS 3177 के अनुसार बनती है और हर क्रेन की 125% लोड टेस्टिंग होती है।
FAQs
Who makes EOT cranes for Bikaner plants?
R K Engineering Works, VKI Area, Jaipur, designs, builds and installs single and double girder EOT cranes for plants in Bikaner district. Cranes are designed to IS 807 and IS 3177, load-tested at 125% of rated load before handover, and supplied with installation and AMC support. The company has worked since 1998 and holds ISO 9001, 14001 and 45001.
Which EOT crane is right for a Bikaner gypsum, clay or ceramic unit?
For loading, unloading and store work up to medium loads, a single girder EOT crane in duty class M3 to M4 is usually enough. For kilns, presses or long production shifts, choose a double girder crane in M5 or higher. Ask for dust-protected motors (IP55) and closed panels.
How does desert heat and dust affect an EOT crane?
Fine dust and summer heat above 45 °C wear brakes, contactors and motors faster. Specify IP55 motors with class F insulation, a sealed control panel, covered DSL or festoon cable, and a monthly cleaning and brake check in the AMC.
What details are needed to get an EOT crane designed?
Capacity in tonnes, span from rail centre to rail centre, hook height, shed length, lifts per hour, power supply (415 V, 3 phase), pendant or radio remote, and whether gantry girders and rails already exist.
What does the 125% load test check?
The crane lifts 1.25 times its rated load. Girder deflection, brake holding, hoist, limit switches and structure are checked, and the test report is handed over with the crane.
बीकानेर में EOT क्रेन कौन बनाता और लगाता है?
आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, बीकानेर ज़िले के प्लांट के लिए सिंगल और डबल गर्डर EOT क्रेन डिज़ाइन करती, बनाती और लगाती है। डिज़ाइन IS 807 और IS 3177 के अनुसार होता है और हर क्रेन की 125% लोड टेस्टिंग होती है।
Request an engineering consultation / Book a site survey. Share capacity, span and hook height: call +91 9799108009, +91 9413341806 or email contact@rkengineeringworks.in. R K Engineering Works, 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur 302013.
