EOT crane manufacturer Kota: R K Engineering Works builds single girder and double girder EOT cranes for Kota plants at its works in VKI Area, Jaipur. Each crane is designed to IS 3177 and IS 807 where relevant and load-tested at 125% of its rated load before handover.
If you are looking for an EOT crane manufacturer in Kota, this guide explains how to choose the right crane, what to share for a design and how we serve plants in Kota and the Hadoti region. We have worked in lifting equipment since 1998, and our systems are certified to ISO 9001, ISO 14001 and ISO 45001.
Last updated: 13 November 2026
Why Kota plants need the right EOT crane
Kota is one of the main industrial centres of south-east Rajasthan. Units in the Indraprastha Industrial Area and other RIICO areas run engineering workshops, fabrication shops, chemical and fertiliser plants, Kota stone cutting units, power plant service shops and warehouses. Many of these plants move heavy parts, slabs, coils, motors and machine beds every day.
An EOT (electric overhead travelling) crane moves these loads across the full length and width of a shed. It keeps the floor clear, cuts manual handling and lowers the risk of dropped loads. A crane that is too small wears out fast. A crane that is too big wastes headroom, steel and power. The right crane is a balance of load, span, lift height and duty.
EOT crane manufacturer Kota: what to tell us before design
Collect these details from your shop floor before you ask for a design. They decide the crane type, girder size, hoist and motors.
| Item | What to share | Why it matters |
|---|---|---|
| Safe working load | Heaviest single lift in tonnes, with slings or tackle | Decides hoist, girder and end carriages |
| Span | Centre distance between the two runway rails | Decides single or double girder |
| Height of lift | Floor to the top hook position | Decides drum size and rope length |
| Long travel | Length of the bay the crane must cover | Decides runway and power feed length |
| Duty | Lifts per hour, hours per day, share of heavy lifts | Decides duty class under IS 3177 |
| Shed details | Column grid, roof height, gantry girder size | Decides headroom and end clearance |
| Power and control | 3 phase supply, pendant or radio remote | Decides panel and control design |
Single girder or double girder EOT crane?
For lighter loads and shorter spans, a single girder EOT crane is often enough. It needs less steel and is simple to maintain. For heavy loads, long spans, high lifts or many hours of work each day, a double girder EOT crane is the safer choice. It gives more hook height and carries a heavier hoist on top of the girders.
| Point | Single girder EOT crane | Double girder EOT crane |
|---|---|---|
| Typical use | Light to medium loads, workshops, stores | Heavy loads, steel, fabrication, plant rooms |
| Hoist position | Hangs under the girder | Runs on rails on top of two girders |
| Hook height | Lower for the same roof height | Higher for the same roof height |
| Span | Short to medium | Medium to long |
| Upkeep | Simple | More parts, more checks |
How to choose an EOT crane in 6 steps
- Fix the safe working load, span, lift height and long travel on the shop floor.
- Count the lifts per hour and hours per day to fix the duty class under IS 3177.
- Choose single girder or double girder from the load, span and duty.
- Pick the hoist: an electric wire rope hoist for most EOT cranes, or a chain hoist for small loads and short lifts.
- Check the shed: gantry girders, rails, columns and brackets must carry the wheel loads with a margin.
- Ask for the 125% load test, limit switches, overload protection and emergency stop in writing.
Safety items every EOT crane in Kota should have
- Upper and lower hoist limit switches
- Long travel and cross travel limit switches or end stops
- Overload protection on the hoist
- Emergency stop on the pendant or remote
- Hook with safety latch
- Brakes on hoist and travel motions
- Warning hooter or light during travel
At R K Engineering Works, every crane is load-tested at 125% of its rated load before handover. All motions, brakes and limit switches are checked in front of the client team.
Service, AMC and modernisation for Kota plants
An EOT crane gives long and safe service when it gets planned care. Keep a daily checklist for the operator: test brakes, limit switches and the emergency stop, and look at the hook and wire rope. For planned visits, a crane AMC covers brakes, wire rope, hook, gearboxes and electrical panels, with a record of each check. Older cranes can get new controls, safety devices and a new hoist through modernisation.
Kota is about 250 km from our Jaipur works by road, so our team plans site surveys, installation and service visits for Kota, Bundi, Baran and Jhalawar plants. Read our main guide on the EOT crane manufacturer in Jaipur for the full range.
FAQs
Do you supply EOT cranes in Kota?
Yes. R K Engineering Works, Jaipur, designs, supplies, installs and services EOT cranes for plants in Kota, Bundi, Baran, Jhalawar and all other districts of Rajasthan.
Which standards do your EOT cranes follow?
Our EOT cranes are designed to IS 3177 and IS 807 where relevant. Each crane is load-tested at 125% of its rated load before handover.
Single girder or double girder for a Kota plant?
Single girder suits light to medium loads and shorter spans. Double girder suits heavy loads, long spans, high lifts and long working hours. We decide after we know the load, span and duty.
How long does a site survey take to plan?
Share your load, span, lift height and a shed sketch by phone or email. Our team then fixes a date to visit your Kota plant and check the shed and runway.
Do you give crane AMC in Kota?
Yes. We plan crane AMC visits for Kota plants, covering brakes, limit switches, wire rope, hook, gearboxes and electrical panels, with a record of each check.
कोटा के लिए ईओटी क्रेन: हिंदी में सवाल-जवाब
कोटा में ईओटी क्रेन कौन बनाता है?
आर के इंजीनियरिंग वर्क्स, जयपुर (1998 से) सिंगल गर्डर और डबल गर्डर ईओटी क्रेन बनाती है और कोटा, बूंदी, बारां, झालावाड़ सहित पूरे राजस्थान में सप्लाई, इंस्टॉलेशन और सर्विस देती है।
ईओटी क्रेन का लोड टेस्ट कितने पर होता है?
हर क्रेन को सौंपने से पहले उसके रेटेड लोड के 125% पर टेस्ट किया जाता है। डिज़ाइन IS 3177 और IS 807 के अनुसार होता है।
क्रेन डिज़ाइन के लिए क्या जानकारी देनी होगी?
सबसे भारी लोड, स्पैन, लिफ्ट की ऊंचाई, बे की लंबाई, रोज़ के काम के घंटे और शेड का स्केच भेजें।
Plan your EOT crane in Kota with us
Request an engineering consultation or book a site survey. Call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. R K Engineering Works, 29 Udyog Vihar, Road No. 14, VKI Area, Jaipur, Rajasthan 302013.
Related: wire rope hoist manufacturer for Kota | EOT crane manufacturer for Pali and Hanumangarh