Looking for an EOT crane manufacturer in Udaipur? R K Engineering Works, based in VKI Area, Jaipur, has built EOT cranes since 1998 and supplies, installs and load-tests them for plants in Udaipur, Rajsamand and Chittorgarh. Every crane is designed to IS 3177 and IS 807 and tested at 125% of rated load at your site before handover.
This guide explains which crane suits a Udaipur plant, how to pick the duty class, what to send for a quote, and what documents you should receive. Last updated: 13 November 2026
Which industries in Udaipur use EOT cranes?
Udaipur and the nearby Mewar belt have a strong base of heavy industry. The main crane users are:
- Marble and granite processing in Madri, Sukher, Kaladwas and the Rajsamand belt: block lifting, gang saw loading and slab handling.
- Mining and mineral processing: zinc, lead, rock phosphate and soapstone units need cranes for maintenance bays and workshops.
- Cement plants around Chittorgarh and Nimbahera: kiln, mill and packing house maintenance.
- Engineering and fabrication workshops in Gudli and Mewar Industrial Area: steel plate, structure and machine handling.
- Chemical, fertiliser and food units: drum, bag and equipment handling.
Types of crane for a Udaipur plant
| Crane type | Best for | Typical use in Udaipur |
|---|---|---|
| Single girder EOT crane | Light to medium loads, lower headroom needs | Workshops, store rooms, small marble cutting units |
| Double girder EOT crane | Heavy loads, higher hook height, high duty class | Marble block sheds, mining workshops, cement plants |
| Gantry / semi-gantry crane | Open yards without a building structure | Marble and granite block yards, steel stock yards |
| Underslung crane | Sheds with roof trusses that can carry load | Assembly lines, light fabrication |
| Jib crane | One work station, short reach | Machine loading, gang saw and polishing lines |
For open marble yards, see our gantry crane manufacturing in Rajasthan.
Duty class: the most important choice
Duty class tells the crane designer how hard the crane will work. It depends on how many hours the mechanism runs and how close the usual load is to the rated load. A marble block crane that lifts near full load many times a day needs a higher class than a maintenance crane that is used twice a week.
Choosing too low a class shortens the life of the rope, gearbox, brakes and wheels. Choosing too high a class adds weight and cost without benefit. Our EOT crane duty class guide explains the M3 to M8 classes in simple words.
How to choose an EOT crane manufacturer in Udaipur: 6 steps
- Write down the safe working load, span, lift height and long travel length.
- Estimate daily operating hours and the usual load. This fixes the duty class.
- Ask the maker to confirm design to IS 3177 and IS 807 on the drawing.
- Check that the quote includes a 125% load test at site and a test certificate.
- Ask for the list of safety devices: limit switches, overload cut-off, brakes, emergency stop.
- Confirm who will service the crane after handover and how fast they can reach Udaipur.
A longer version of this list is in our EOT crane manufacturer checklist for Rajasthan.
What to share for a crane design
- Capacity (safe working load) and any future increase you expect
- Span between rail centres and building column details
- Required hook height and available headroom
- Long travel length and rail or gantry girder details
- Hours of use per day and type of material lifted
- Power supply, indoor or outdoor use, dust or heat near the crane
How R K Engineering Works builds and tests your crane
We design each crane in-house and fabricate it at our Jaipur works under ISO 9001, ISO 14001 and ISO 45001 systems. After erection in Udaipur, our team runs a no-load test, a rated load test and a 125% static overload test. You receive the GA drawing, test certificate and operation and maintenance manual. Read more in what a 125% load test checks.
Safety features every crane should have
- Upper and lower hoist limit switches
- Long travel and cross travel limit switches and end stoppers
- Overload protection on the hoist
- Electro-magnetic or thruster brakes on all motions
- Emergency stop on the pendant or remote
- Rail sweepers, buffers and a warning hooter
Common mistakes Udaipur buyers should avoid
- Comparing quotes without checking that duty class and standards are the same
- Ignoring dust from marble cutting, which needs better motor and panel protection
- Skipping the load test or accepting only a no-load trial
- Not planning service support and spare parts before purchase
उदयपुर में ईओटी क्रेन निर्माता
आर के इंजीनियरिंग वर्क्स, जयपुर, 1998 से ईओटी क्रेन, गैन्ट्री क्रेन और होइस्ट बनाता है। उदयपुर, राजसमंद और चित्तौड़गढ़ की मार्बल, ग्रेनाइट, माइनिंग और सीमेंट इकाइयों के लिए हम सिंगल गर्डर और डबल गर्डर क्रेन देते हैं। हर क्रेन IS 3177 और IS 807 के अनुसार डिज़ाइन होती है और साइट पर 125% लोड टेस्ट के बाद ही सौंपी जाती है। सही ड्यूटी क्लास चुनने के लिए अपनी क्षमता, स्पैन, लिफ्ट ऊँचाई और रोज़ के काम के घंटे बताएं।
Request an engineering consultation
Planning a crane for your Udaipur plant? Book a site survey with our engineers. Call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. Address: 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur, Rajasthan 302013. You can also use our contact page.
Related: EOT crane manufacturer in Jaipur.
FAQs
Do you supply EOT cranes in Udaipur?
Yes. R K Engineering Works designs and builds EOT cranes at VKI Area, Jaipur, and installs them in Udaipur, Rajsamand, Chittorgarh and the rest of Rajasthan. Each crane is load-tested at 125% at site before handover.
Which standard should an EOT crane in Udaipur follow?
An EOT crane in India should be designed to IS 3177 for the crane and IS 807 for the structure, design, erection and testing. Ask the maker to name the duty class on the drawing.
Which crane suits a marble or granite unit in Udaipur?
Most marble and granite units use a double girder EOT crane inside the shed for block handling and a gantry or semi-gantry crane in the open yard. Duty class M5 or M6 is common for frequent block lifting; the right class depends on hours and load spectrum.
How long does it take to get a new EOT crane?
Time depends on capacity, span and duty class. After the site survey we share a drawing and a schedule for design, fabrication, dispatch, erection and load test, so you can plan your shed work.
उदयपुर में ईओटी क्रेन कौन बनाता है?
आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, 1998 से ईओटी क्रेन बनाता है। क्रेन IS 3177 और IS 807 के अनुसार डिज़ाइन होती है, उदयपुर साइट पर 125% लोड टेस्ट होता है और टेस्ट सर्टिफिकेट दिया जाता है।
क्या आप उदयपुर में क्रेन की एएमसी भी देते हैं?
हाँ। हम उदयपुर, राजसमंद और चित्तौड़गढ़ में ईओटी क्रेन की एएमसी, जाँच और मॉडर्नाइज़ेशन करते हैं। साइट सर्वे बुक करने के लिए +91 9799108009 पर कॉल करें।