Gantry Crane for Precast Concrete Yards in Jaipur: How to Choose

A gantry crane for a precast concrete yard in Jaipur runs on ground rails over the casting beds and stacking area, so the yard does not need a building or column structure to carry crane loads. R K Engineering Works, VKI Area, Jaipur, has designed and built gantry, semi-gantry and goliath cranes since 1998 for precast, pipe, stone and steel yards across Rajasthan.

This guide is for owners, plant heads and project managers of precast yards in Jaipur and nearby areas such as Bagru, Bassi, Chomu, Kukas, Sitapura, Phulera and Kotputli. It covers which crane type fits, what to send in your enquiry, how to compare designs and what to check at handover.

What is the right gantry crane for a precast concrete yard in Jaipur?

For most Jaipur precast yards the right choice is a rail-mounted gantry (goliath) crane with an electric wire rope hoist, designed to IS 3177 and IS 807, with a span that covers the casting beds and a truck lane. Light-element yards use single girder; beam and girder yards use double girder.

Precast work is repetitive: demould, lift, turn, stack and load, many times a shift. That makes the duty class as important as the capacity. Jaipur’s dust and summer heat also mean outdoor-rated motors, a sealed panel and a rain cover for the hoist.

Gantry crane specifications for precast yards

ItemLight-element yard (walls, kerbs, pavers, poles)Heavy-element yard (beams, box culverts, girders)
Crane typeSingle girder gantryDouble girder goliath, sometimes with two hoists
HoistElectric wire rope hoistOpen winch crab or heavy wire rope hoist
Duty class (typical)M4-M5M5-M6
TravelLong-travel on ground rails, cable reel or festoonLong-travel on ground rails, cable reel; storm anchors
ControlsPendant or radio remote, VFD for gentle placingRadio remote, VFD, creep speed for setting elements
Design basisIS 3177, IS 807; wind load as per IS 875 Part 3IS 3177, IS 807; wind load as per IS 875 Part 3
Testing125% load test at site, deflection check125% load test at site, deflection check

How do you choose a precast-yard gantry crane? 7 steps

  1. Heaviest lift: weight of the biggest element plus lifting beam, slings and any mould part that lifts with it.
  2. Span: width of the casting beds plus the stacking area and a truck lane, with clearance on both sides of the rails.
  3. Hook height: enough to lift an element over stacked stock and onto a trailer bed.
  4. Travel length: the full run of the beds and stock yard; this sets rail length and the power-feed method.
  5. Duty: number of lifts per hour and hours per day, which sets the IS 3177 class.
  6. Site: soil and rail foundation, slope, drainage in monsoon and wind exposure.
  7. Controls and safety: radio remote, VFD, limit switches, overload cut-off, anti-collision if two cranes share a rail.

Not sure between gantry, semi-gantry and goliath? Read gantry vs semi-gantry vs goliath crane.

Single girder or double girder for a precast yard?

PointSingle girder gantryDouble girder goliath
Load rangeLight to mediumMedium to heavy
SpanShorterWider spans
Hook heightModerateHigher, crab runs on top of girders
Two hoists or tandem liftsNot usualPossible
Typical elementWall panels, kerbs, poles, paversBeams, box culverts, bridge girders
Weight on railsLowerHigher; stronger rail foundation

What should your enquiry include?

  • Element list with the heaviest weight and its size
  • Yard layout sketch with bed and stock positions
  • Required span, hook height and travel length
  • Lifts per hour and working hours
  • Power supply details
  • Photos of the yard and rail path

Send these to contact@rkengineeringworks.in. Our engineer visits the yard, measures it and sends a layout drawing before you place the order.

What do you get at handover?

  • General arrangement drawing and design calculations
  • 125% load test at site with deflection record
  • Test certificate, operation and maintenance manual
  • Operator briefing on safe lifting of precast elements
  • AMC option for planned maintenance

See how the test is done in EOT crane load test at 125%, and our wider range on the gantry and goliath crane manufacturer in Rajasthan page and the EOT crane manufacturer in Jaipur page.

Where do we serve precast yards around Jaipur?

AreaTypical yard
Bagru, Bassi, ChaksuWall panels, kerbs, pavers, poles
Kukas, Chomu, SitapuraPipes, manholes, building elements
Phulera, Kotputli, ShahpuraBox culverts, beams for road and rail work
Rest of RajasthanSite survey and installation by our Jaipur team

Common precast-yard mistakes we see: rails laid on weak soil that settle in the first monsoon, a span sized only for the beds with no truck lane, a hoist without VFD that swings thin wall panels, and no rain cover over the panel. Each one is easier to fix on paper than after erection.

Short facts: R K Engineering Works has built cranes since 1998. We are ISO 9001, 14001 and 45001 certified. Our gantry cranes are designed to IS 3177 and IS 807 and load-tested at 125% at site.

FAQs: gantry crane for precast yards in Jaipur

What capacity gantry crane does a precast yard in Jaipur need?

Size the crane for the heaviest element plus its lifting beam, slings and any mould part that comes up with it. Light yards making boundary-wall panels and kerbs need a small single girder gantry; yards casting beams, box culverts and girders need a double girder goliath. We confirm after a site survey.

Single girder or double girder gantry for a precast yard?

Single girder suits lighter elements, shorter spans and moderate hook heights. Double girder suits heavy beams and girders, wide spans, high hook height or two hoists working together.

Can one gantry crane serve the casting beds and the stacking yard?

Yes, if the rails run the full length of the beds and the stock area, and the span covers both. Many yards use one crane for casting and demoulding and a second, lighter crane for stacking and loading trucks.

How is a precast-yard gantry crane tested?

Every new crane is load-tested at 125% of its safe working load at site, with a deflection check, and handed over with drawings, test certificate and manual.

जयपुर में प्रीकास्ट यार्ड के लिए गैन्ट्री क्रेन कौन बनाता है?

आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर 1998 से प्रीकास्ट और कंक्रीट यार्ड के लिए सिंगल और डबल गर्डर गैन्ट्री और गोलियथ क्रेन IS 3177 और IS 807 के अनुसार बनाता, लगाता और सर्विस करता है।

प्रीकास्ट यार्ड की गैन्ट्री क्रेन का स्पैन कैसे तय करें?

कास्टिंग बेड और स्टैकिंग एरिया की कुल चौड़ाई, ट्रक के आने की लेन और रेल के दोनों ओर की खाली जगह नापकर स्पैन तय होता है। हमारा इंजीनियर साइट सर्वे में यह नापता है।

Request an engineering consultation

Request an engineering consultation or book a site survey: call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. R K Engineering Works, VKI Area, Jaipur.

Last updated: 16 Nov 2026

Leave a Comment

Your email address will not be published. Required fields are marked *