Answer first: R K Engineering Works is an EOT crane manufacturer in Chittorgarh buyers can reach directly. From our works at 29, Udyog Vihar, Road No. 14, VKI Area, Jaipur, we have designed and built EOT cranes since 1998. We supply single and double girder EOT cranes for Chittorgarh city, Nimbahera, Begun, Kapasan, Gangrar and Shambhupura. Every crane is designed to IS 3177 and IS 807 and load-tested at 125% of its rated load before handover.
Last updated: 16 Nov 2026
Who is an EOT crane manufacturer in Chittorgarh?
An EOT (electric overhead travelling) crane runs on rails fixed to your shed columns. A bridge girder spans the bay, and a hoist on a trolley lifts the load. The crane moves in three directions, so one crane can reach almost any point in the bay.
Chittorgarh district has cement plants, stone and marble units, fabrication workshops, agro processing units and warehouses. Each of these needs a crane sized for its own load, span and working hours. R K Engineering Works designs the crane for your shed, fabricates it at our Jaipur works, installs it with our own team, and services it after handover.
- Since 1998 in material handling.
- ISO 9001, ISO 14001 and ISO 45001 certified.
- EOT cranes designed to IS 3177 and IS 807.
- Every crane load-tested at 125% of rated load.
- Phones: +91 9799108009, +91 9413341806. Email: contact@rkengineeringworks.in.
चित्तौड़गढ़ में ईओटी क्रेन निर्माता कौन है? (हिंदी में जवाब)
R K Engineering Works, VKI एरिया, जयपुर, 1998 से ईओटी क्रेन बनाता है। हम चित्तौड़गढ़, निम्बाहेड़ा, बेगूं, कपासन, गंगरार और शंभूपुरा की फैक्ट्रियों, सीमेंट प्लांट वर्कशॉप, स्टोन यूनिट और गोदामों के लिए सिंगल व डबल गर्डर ईओटी क्रेन बनाते, लगाते और सर्विस करते हैं। हर क्रेन IS 3177 और IS 807 के अनुसार डिज़ाइन होती है और हैंडओवर से पहले 125% लोड टेस्ट किया जाता है।
Which EOT crane type fits a Chittorgarh plant?
| Crane type | Usual use in Chittorgarh | Good for | Point to check |
|---|---|---|---|
| Single girder EOT crane | Fabrication shops, stone units, warehouses | Light to medium loads, normal duty | Headroom and span |
| Double girder EOT crane | Cement plant maintenance bays, heavy workshops | Heavy loads, wide spans, high hook | Building column capacity |
| Underslung EOT crane | Sheds with low roof or no runway columns | Light loads, roof-hung runway | Roof truss strength |
| Gantry / goliath crane | Open stone yards, outdoor storage | Outdoor lifting without building support | Ground rail and foundation |
For a full side-by-side, read single vs double girder EOT crane.
Is a 5 ton single girder EOT crane right for you?
A 5 ton single girder EOT crane is the most common request we get from small and mid-size plants. It suits loads up to 5 tonnes, spans of a typical factory bay, and normal working hours. Choose double girder when the hook must go very high, the span is wide, or the crane works most of the shift.
| Question | If yes | If no |
|---|---|---|
| Is the heaviest load 5 tonnes or less? | Single girder is a good start | Look at double girder |
| Is the roof low? | Ask for a low headroom hoist | Standard hoist is fine |
| Will the crane lift many times every hour? | Choose a higher duty class | Normal duty class works |
| Do loads swing near machines? | Ask for VFD (soft start/stop) | Two-speed control is fine |
Duty class matters as much as tonnage. See our EOT crane duty class guide and how to fix capacity, span and lift height.
How do you choose an EOT crane: 6 steps
- Write the heaviest load you will lift, plus slings and lifting tools.
- Measure the span: the distance between the two runway rail centres.
- Measure the hook height you need under the girder.
- Count lifts per hour and hours per day to fix the duty class.
- Check that your columns can carry runway beams, or plan a separate structure.
- Ask for a written layout drawing, scope, testing plan and AMC terms.
EOT cranes for cement plants around Nimbahera
Cement sites run long shifts in dust and heat. Cranes in packing plants, workshops and kiln maintenance bays need sealed motors and panels, the right duty class, and planned maintenance. Read our EOT crane for cement plant guide for the details.
What does a crane project look like?
| Stage | What happens |
|---|---|
| 1. Enquiry | You share load, span, hook height and photos of the shed. |
| 2. Site survey | Our engineer measures the bay and checks columns and power. |
| 3. Drawing | You get a layout drawing and scope to approve. |
| 4. Fabrication | Girder, end carriages and trolley are built at our Jaipur works. |
| 5. Installation | Our team erects the crane, runway and electrics at site. |
| 6. Load test and handover | The crane is tested at 125% of rated load. See EOT crane load test at 125%. |
What safety items should every crane have?
- Upper and lower hoist limit switches.
- Long travel and cross travel limit switches.
- Overload protection.
- Electromagnetic brakes on hoist and travel.
- Emergency stop on the pendant or radio remote.
- Clear safe working load marking on the girder.
FAQs: EOT crane manufacturer in Chittorgarh
Who is an EOT crane manufacturer in Chittorgarh?
R K Engineering Works, 29 Udyog Vihar, Road No. 14, VKI Area, Jaipur, has built EOT cranes since 1998. We design, fabricate, install and service single and double girder EOT cranes for Chittorgarh, Nimbahera, Begun, Kapasan and Gangrar. Cranes are designed to IS 3177 and IS 807 and load-tested at 125% before handover.
Is a 5 ton single girder EOT crane enough for my workshop?
For most fabrication shops, stone units and warehouses that lift up to 5 tonnes a few times an hour, a single girder EOT crane is usually enough. If you need a high hook, a long span or many lifts per shift, a double girder crane may suit better. We confirm after a survey.
Do you serve cement plants in Nimbahera and Shambhupura?
Yes. We build EOT cranes for maintenance bays, packing plants and workshops, and service existing cranes through AMC and modernisation. Duty class is chosen for the dusty, multi-shift conditions of cement sites.
चित्तौड़गढ़ में ईओटी क्रेन कौन बनाता है?
R K Engineering Works, VKI एरिया, जयपुर, 1998 से ईओटी क्रेन बनाता है। हम चित्तौड़गढ़, निम्बाहेड़ा, बेगूं, कपासन और गंगरार के लिए सिंगल और डबल गर्डर ईओटी क्रेन डिज़ाइन, फैब्रिकेट, इंस्टॉल और सर्विस करते हैं। क्रेन IS 3177 और IS 807 के अनुसार बनती है और 125% लोड टेस्ट होता है।
5 टन सिंगल गर्डर ईओटी क्रेन के लिए क्या जानकारी देनी होगी?
स्पैन (दोनों रेल के बीच की दूरी), हुक की ऊँचाई, अधिकतम लोड, हर शिफ्ट में कितनी बार लिफ्ट होगी, और शेड में कॉलम/रनवे बीम की स्थिति। साइट सर्वे के बाद हम लिखित लेआउट ड्रॉइंग देते हैं।
Request an engineering consultation
Planning a crane in Chittorgarh, Nimbahera or Begun? Call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. Share your load, span and hook height, and we will plan a site survey.
