Gantry Crane for Marble Yards in Udaipur and Rajsamand

Last updated: 20 November 2026

Who makes gantry cranes for marble yards in Udaipur and Rajsamand?

R K Engineering Works, VKI Area, Jaipur, designs and builds gantry and goliath cranes for marble and granite yards in Udaipur, Rajsamand, Kankroli, Nathdwara and Kishangarh. We size each crane for your heaviest block, rail span, cantilever and daily hours. Cranes are designed to IS 807 and IS 3177 and load-tested at 125% before handover. Working since 1998, ISO 9001, 14001 and 45001 certified.

उदयपुर और राजसमंद के मार्बल यार्ड के लिए गैंट्री क्रेन कौन बनाता है?

आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, उदयपुर, राजसमंद, कांकरोली, नाथद्वारा और किशनगढ़ के मार्बल और ग्रेनाइट यार्ड के लिए गैंट्री और गोलियथ क्रेन बनाती है। क्रेन का डिज़ाइन IS 807 और IS 3177 के अनुसार होता है और सौंपने से पहले 125% लोड टेस्ट होता है। 1998 से काम, ISO 9001, 14001 और 45001 प्रमाणित।

What size gantry crane does a marble yard in Udaipur need?

Take the heaviest block, add about 10% for the lifting beam and slings, then pick the next standard capacity. Most Udaipur and Rajsamand block yards need a 20 t to 30 t double girder gantry with 15 m to 25 m span and 5 m to 8 m cantilevers. Slab yards usually need 5 t to 10 t.

Use this lookup table to size the crane in one minute. Final size is fixed after a site survey.

Heaviest loadHook load (load + tackle)Crane capacityGirderTypical use in the yard
4 t slab bundleabout 4.5 t5 tSingle girderSlab stacking and polishing line
9 t slab stackabout 10 t10 tSingle or double girderSlab bundles and truck loading
18 t blockabout 20 t20 tDouble girderSmall raw blocks
22 t blockabout 24 t25 tDouble girderStandard Rajsamand raw blocks
27 t blockabout 30 t30 tDouble girderLarge granite and marble blocks

Span = yard width between rails. Cantilever = distance to the truck lane outside the rails. Design to IS 807 and IS 3177, load test at 125% before handover. Book a site survey: +91 9799108009, contact@rkengineeringworks.in.

Gantry crane for stone yards: quick facts

ItemTypical choice for marble and granite yards
Capacity20 t to 30 t for raw blocks; 5 t to 10 t for slabs
GirderDouble girder above 10 t or above 20 m span
Rail span15 m to 30 m, set by yard width
Cantilever5 m to 8 m on one or both sides for truck loading
Lift height8 m to 10 m under hook
Duty classM5 for most yards; M6 for two-shift block yards (IS 3177)
Design and testIS 807 structure, IS 875 Part 3 wind load, 125% load test
Outdoor protectionIP55 motors, panel under canopy, rain cover on trolley

Worked example

A Rajsamand yard lifts raw blocks up to 22 t. Add about 2 t for the lifting beam and slings, so the hook load is 24 t. Choose a 25 t double girder gantry. The yard is 20 m wide, so the rail span is 20 m. Trucks park outside one leg, so add a 6 m cantilever on that side. The block stack is 4 m high, so a 9 m lift gives safe clearance. The crane works one shift of about 8 hours, so duty class M5 is enough.

How to choose a gantry crane for a stone yard: 6 steps

  1. Weigh your heaviest block and add the lifting tackle. This is the hook load.
  2. Measure the yard width. This sets the rail span between the two legs.
  3. Mark where trucks park. If they stand outside the track, add a cantilever.
  4. Measure the highest stack and add clearance. This sets the lift height.
  5. Count working hours and lifts per hour. This sets the duty class under IS 3177. Read our duty class guide.
  6. Plan rails, foundation and power supply before the crane is made. Book a site survey so the design matches the ground.

Gantry crane vs EOT crane for a marble unit

PointGantry craneEOT crane
Runs onRails on the groundGantry girders on building columns
Best placeOpen block yardInside a shed or gang-saw hall
Building neededNoYes, strong columns
Truck loadingEasy with cantileverTruck must enter shed
WeatherNeeds outdoor protectionProtected by roof

Many Udaipur units use both: a gantry in the open block yard and an EOT crane over the gang-saws. For shed cranes, see our EOT crane guide for Udaipur.

Safety points for stone yard gantry cranes

  • Anemometer and storm anchor, so the crane is locked when wind is high.
  • Rail clamps and end stoppers on both rail ends.
  • Overload cut-off on the hoist, set to the rated load.
  • Upper and lower hoist limit switches and long-travel limit switches.
  • Warning hooter and flashing light while the crane travels.
  • 125% load test at site before handover. Read what a 125% load test checks.

Care and AMC for yard cranes

Marble dust and summer heat wear out wheels, brakes and rope faster. Check the wire rope and brake every week, grease wheels and the rope drum every month, and clean panel filters often. For a planned schedule, see our crane AMC guide. For more gantry and goliath types, read the gantry crane guide for Rajasthan.

FAQs

Who makes gantry cranes for marble yards in Udaipur and Rajsamand?

R K Engineering Works, VKI Area, Jaipur, designs and builds gantry and goliath cranes for marble and granite yards in Udaipur, Rajsamand, Kankroli, Nathdwara, Kishangarh and nearby areas. Cranes are designed to IS 807 and IS 3177 and load-tested at 125% before handover. Working since 1998, ISO 9001, 14001 and 45001 certified.

What capacity gantry crane is needed for marble blocks?

Size the crane for the heaviest block plus the lifting tackle. Many Udaipur and Rajsamand yards handle raw blocks of 15 to 30 t, so 20 t, 25 t and 30 t gantries are common. Gang-saw slab handling needs much less, often 5 to 10 t.

Single girder or double girder gantry for a stone yard?

Single girder suits up to about 10 t and shorter spans. For raw block handling above 10 t, spans over 20 m and long daily hours, a double girder gantry with an open winch trolley is the safer choice.

Why does a stone yard gantry need cantilevers?

A cantilever extends the girder beyond the legs, often 5 to 8 m, so the crane can load and unload trucks parked outside the rail track without the truck entering the yard.

Which standards apply to a gantry crane in India?

IS 807 covers design and testing of the crane structure, IS 3177 covers the mechanisms and duty class, and IS 875 Part 3 gives wind loads for outdoor cranes.

गैंट्री क्रेन ऑर्डर करने से पहले क्या बताएँ?

सबसे भारी ब्लॉक का वज़न, रेल स्पैन, लिफ्ट हाइट, कैंटिलीवर की लंबाई, रोज़ कितने घंटे चलेगी, और यार्ड की बिजली सप्लाई। साइट का नक्शा भी भेजें।

Book a site survey

Send your block weight, yard width and truck position. We will size the crane and plan rails and power with you. Call +91 9799108009 or +91 9413341806, or email contact@rkengineeringworks.in. Book a site survey.

Leave a Comment

Your email address will not be published. Required fields are marked *