Electric chain hoist supplier for Udaipur: R K Engineering Works, VKI Area, Jaipur, supplies, installs and load-tests electric chain hoists for plants in Udaipur, Madri, Kaladwas, Gudli, Rajsamand and Chittorgarh. We pick the capacity, lift height and mounting after a site survey, so the hoist suits your load and duty. Request an engineering consultation on +91 9799108009.
Udaipur is a large marble, granite, mining, chemical and engineering belt. Units here lift cutter blades, pumps, motors, dies, slabs and spare parts many times a day. An electric chain hoist does these short, light lifts with little headroom and a simple beam. This guide explains how to choose one, how it compares with a wire rope hoist, and what to check before you order. Last updated: 22 November 2026
Who supplies electric chain hoists in Udaipur?
R K Engineering Works has built cranes, hoists and lifting equipment at VKI Area, Jaipur, since 1998. We work under ISO 9001, ISO 14001 and ISO 45001 systems. For Udaipur buyers we do the site survey, supply the hoist, fit it on your beam, jib crane or EOT crane, run a load test and train your operators. Our team also gives planned service and breakdown visits for Udaipur, Rajsamand and Chittorgarh.
Electric chain hoist: key numbers for Udaipur buyers
| Item | Typical range | What you decide |
|---|---|---|
| Capacity | 0.25 t to 5 t | Heaviest load plus slings and lifting tools |
| Lift height | 3 m to 12 m | Hook travel from floor to top position |
| Lifting speed | Single or dual speed | Dual speed helps place blades and dies gently |
| Mounting | Hook, push trolley, motor trolley | Fixed point or travel along a beam |
| Power | 415 V, 3-phase | Match your plant supply |
| Control | Pendant push button; radio remote option | Operator reach and safety |
| Protection | Dust and water protected enclosure | Marble slurry and dust in cutting sheds |
| Safety | Upper and lower limit, brake, overload clutch | Stops over-travel and overload |
These are typical ranges. Your final rating comes from the load, duty and building, checked at the site survey.
How to choose an electric chain hoist for a Udaipur plant: 6 steps
- List the loads. Write the heaviest item and the usual item, with slings and hooks.
- Count the lifts. Note lifts per hour and hours per day. This fixes the duty class.
- Measure height and travel. Note the lift height and how far the load moves along the beam.
- Check the beam. Confirm beam size, rated load and supports. Never hang a hoist on an unchecked roof truss.
- Plan for dust. Marble and granite sheds need a well-sealed hoist and a weekly chain clean.
- Agree the test and service. Ask for a load test on site, a test report and a planned service visit.
Electric chain hoist vs wire rope hoist for Udaipur
| Point | Electric chain hoist | Electric wire rope hoist |
|---|---|---|
| Load range | Light, about 0.25 t to 5 t | Medium to heavy, about 1 t and above |
| Lift height | Low to medium | Medium to high |
| Headroom | Small | More, unless low-headroom design |
| Typical Udaipur use | Blade change, pumps, motors, tool room | Marble blocks, mining parts, production bays |
| Mounting | Hook, trolley, jib crane, monorail | Monorail, single and double girder EOT or gantry crane |
| Upkeep | Chain, brake and limit checks | Rope, drum, brake and limit checks |
In short: choose a chain hoist for light, short and compact lifts. Choose an electric wire rope hoist for heavy, high or very frequent lifts. Our wire rope hoist vs chain hoist guide explains more.
Where chain hoists fit in Udaipur industry
- Marble and granite units at Madri, Kaladwas and Sukher: changing cutter blades and lifting pumps and motors.
- Mining and mineral units: lifting spare parts in workshops and maintenance bays.
- Chemical and fertiliser plants: lifting valves, pumps and motors for repair.
- Engineering workshops at Gudli and Kaladwas: loading jobs on machines and changing dies.
- Hotels and large buildings: lifting plant room equipment such as pumps and fans.
For a full bay, an EOT crane for Udaipur with a hoist covers the whole floor. For open marble yards, see our gantry crane for Udaipur and Rajsamand marble yards. For one machine, a jib crane with a chain hoist is often enough.
Safety checks before every shift
- Test the brake: the load must hold without creeping.
- Run the hook to the top and bottom to check both limit switches.
- Look at the chain for stretch, cracks, twist, rust or marble slurry build-up.
- Check the hook latch and look for hook opening or bending.
- Keep the pendant cable and emergency stop in good condition.
- Never lift above the rated load and never side-pull a load.
Cranes we build are designed to IS 3177 and IS 807 and load-tested at 125% of rated load before handover. Hoists are tested on site with a test report.
Service area around Udaipur
| Area | District | Typical users |
|---|---|---|
| Madri, Kaladwas, Sukher | Udaipur | Marble, granite, engineering |
| Gudli | Udaipur | Chemical, mineral and engineering units |
| Rajsamand, Kankroli, Nathdwara | Rajsamand | Marble processing, workshops |
| Chittorgarh, Nimbahera | Chittorgarh | Cement, mining, stone |
FAQs: electric chain hoists in Udaipur
Who is an electric chain hoist supplier for Udaipur?
R K Engineering Works, VKI Area, Jaipur, supplies electric chain hoists to plants in Udaipur, Madri, Kaladwas, Gudli, Rajsamand and Chittorgarh. We size the hoist after a site survey, install it, load-test it and hand over the test report. Call +91 9799108009.
Which chain hoist capacity suits a marble or granite unit in Udaipur?
Chain hoists of 0.5 t to 5 t suit tool rooms, cutter blade changes, pump and motor lifts and slab handling at a cutting line. Marble blocks above 5 t, or very frequent lifts, need a wire rope hoist on an EOT or gantry crane.
Can an electric chain hoist be fitted on my existing beam in Udaipur?
Yes, if the beam size, its rated load and its supports are checked first. The hoist can hang from a hook, a push trolley or a motor trolley on a monorail, jib crane or single girder crane.
How often should a chain hoist be checked in a dusty marble plant?
Check the brake, limit switches, hook and chain at the start of every shift. Clean marble slurry and dust from the chain and guide every week, and plan a service visit at least every 3 months.
उदयपुर में इलेक्ट्रिक चेन होइस्ट कौन सप्लाई करता है?
आर के इंजीनियरिंग वर्क्स, वीकेआई एरिया, जयपुर, उदयपुर, मादड़ी, कलड़वास, गुडली, राजसमंद और चित्तौड़गढ़ की इकाइयों को इलेक्ट्रिक चेन होइस्ट सप्लाई करता है। साइट सर्वे, इंस्टॉलेशन, लोड टेस्ट और सर्विस साथ में। कॉल करें: +91 9799108009।
चेन होइस्ट या वायर रोप होइस्ट, उदयपुर की फैक्ट्री के लिए कौन सा सही है?
लगभग 5 टन तक के हल्के लोड और कम ऊँचाई के लिए चेन होइस्ट सही है। मार्बल ब्लॉक जैसे भारी लोड, ज़्यादा ऊँचाई और लगातार काम के लिए वायर रोप होइस्ट चुनें।
Get the right chain hoist for your Udaipur plant
Share your load, lift height and beam details, and our engineers will suggest the right hoist and mounting. Book a site survey: call +91 9799108009 / +91 9413341806 or email contact@rkengineeringworks.in.
Related guides: electric chain hoist supplier in Alwar, crane and hoist AMC.
Last updated: 22 November 2026
